[OLSR-users] olsr for multiple interfaces

[prajakta choudhari]

dear all:

Here is the small scenario i am trying to demo with
olsr-0.4.8(ETX)

 
--------1             2--------3           4---------
|      |---------------|      |-------------|       |
|AP 1  |               |AP 2  |             |AP 3   | 
|      |---------------|      |-------------|       | 

--------5             6--------7           8---------

1: wlan0wds0  channel:6  ip address:192.168.12.1
2: wlan0wds0  channel:6  ip address:192.168.12.2
3: wlan0wds1  channel:6  ip_address:192.168.13.1
4: wlan0wds0  channel:6  ip_address:192.168.13.2

5: wlan1wds0  channel:11  ip address:192.168.22.1
6: wlan1wds0  channel:11  ip address:192.168.22.2
7: wlan1wds1  channel:11  ip_address:192.168.23.1
8: wlan1wds0  channel:11  ip_address:192.168.23.2


when i run olsr the routes for AP3 are not added in
routing table of AP1 and vice versa. I found out that
the AP2 is forms ASYM links with AP3.

But if i  remove 5,6,7,8 connections and run OLSR only
on 1,2,3,4 path, the route entry for AP3 is added in
AP1.


How can i make it run for the above scenario

Thanks
Prajakta Choudhari
  




		
__________________________________________________________
Yahoo! India Answers: Share what you know. Learn something new
http://in.answers.yahoo.com/