AW: [OLSR-users] Problems with 0.4.10 when changing IP address of the main interface

[Joerg Pommnitz]

Hello Andreas,
first thanks for caring and taking the time to respond.

To answer your questions: this is IPv4, and yes, the address of the interface really changes. This is not just an alias. I have a tcpdump that shows the HELLO messages as seen on a neighbour node. The source address in the IP-Header changes as expected, but the originator address in the HELLO message itself remains the old one. This caused a routing loop in my setup.
  
--  Regards 
       Joerg 


----- Ursprüngliche Mail ----
Von: Andreas Tønnesen <(spam-protected)>
An: Joerg Pommnitz <(spam-protected)>; OLSR discussion and development <(spam-protected)>
Gesendet: Dienstag, den 28. März 2006, 03:56:58 Uhr
Betreff: Re: [OLSR-users] Problems with 0.4.10 when changing IP address of      the main interface

Hi,

Are you using IPv6 or IPv4? And you are _changing_ the IP not just adding
another address right?

- Andreas

> Hello all,
> when using olsrd-0.4.10 with a changing main interface address this change
> seems to be interpreted in a wrong way: the originator address remains the
> old one, but the packets send through this interface come from the new
> address. Listening olsrd's interpret this as a multi-homed host.
>
> Do I something wrong? Can this be fixed?
>
> Thanks in advance
>   Jörg
>
>
> _______________________________________________
> olsr-users mailing list
> (spam-protected)
> https://www.olsr.org/mailman/listinfo/olsr-users
>