[OLSR-users] No routes - what's going wrong?

[Dan Flett]

OK, I sorted it out myself -

On one of the nodes, the broadcast addresses of two interfaces were
incorrectly set.  Broadcast addresses are pretty important to OLSR :)

Cheers,

Dan

> -----Original Message-----
> From: (spam-protected) 
> [mailto:(spam-protected)] On Behalf Of Dan Flett
> Sent: Tuesday, 11 July 2006 9:52 AM
> To: 'OLSR discussion and development'
> Subject: [OLSR-users] No routes - what's going wrong?
> 
> Hi again,
> 
> I've got OLSR running on 4 nodes of our network now.  After I 
> installed it on our main routing node, I was receiving routes 
> from the one other node that was running OLSR.  Now 4 nodes 
> are running it and no-one is getting any routes - and the 
> httpinfo plugin shows that only one node can see any links.
> I'm not sure adding the other 2 new nodes caused the problem 
> because when I disable olsrd on them and restart olsrd on the 
> main node, I still have no routes.
> 
> Note that all the links involved are point-to-point links 
> using directional antennas, each link is a separate /28 subnet.
> 
> All nodes are running olsrd version 0.4.10-1, with the http 
> plugin and some are running the nameservice plugin
> 
> Here's a typical olsrd.conf - the only thing that differs 
> between nodes is the Hna4 and Interface declarations - all 
> the numerical parameters are identical.
> 
> DebugLevel      0
> IpVersion       4
> ClearScreen     no
> Hna4
> {
>    10.10.145.64      255.255.255.240
>    10.10.145.96      255.255.255.240
>    10.10.145.112     255.255.255.240
>    10.10.145.224     255.255.255.240
> }
> AllowNoInt      yes
> UseHysteresis   no
> LinkQualityLevel        2
> LinkQualityWinSize      100
> Pollrate        0.05
> TcRedundancy    2
> MprCoverage     7
> LinkQualityFishEye      1
> LinkQualityDijkstraLimit 0 5.0
> Interface "wlan0" "wlan1" "ath0" "eth0"
> {
>     HelloInterval       5.0
>     HelloValidityTime   200.0
>     TcInterval          0.5
>     TcValidityTime      260.0
>     MidValidityTime     100.0
>     HnaValidityTime     100.0
> }
> 
> 
> Is there anything I can tweak to try to fix things?
> 
> Cheers,
> 
> Dan
> 
> _______________________________________________
> olsr-users mailing list
> (spam-protected)
> https://www.olsr.org/mailman/listinfo/olsr-users
>