[OLSR-users] Olsr on Suse 10.0 works only partially

[Sven-Ola Tuecke]

Hi,

do not forget to allow IP forwarding for others. Otherwise your neighbours 
will firewall you sooner or later.

LG Sven-Ola

"stn21" <(spam-protected)> schrieb im Newsbeitrag 
news:(spam-protected)
> Sven-Ola Tuecke schrieb:
>
>> Hi,
>>
>> iptables -F
>
> Yes, thank you, works.
>
> Actually I used iptables -I INPUT 1 -j ACCEPT
> Which additional ports must be opened for olsrd ?
>
> Thanks, Stefan
>
>
>>
>> HTH Sven-Ola
>>
>> "stn21" <(spam-protected)> schrieb im Newsbeitrag 
>> news:(spam-protected)
>>
>>> Hi all,
>>>
>>> Olsr(d) runs fine on windows and on my WRT54g with the 
>>> "freifunk"-firmware
>>>
>>> Now I installed it on Suse 10.0. with a MD40900-USB-Stick and 
>>> ndiswrapper.
>>>
>>> Here olsrd does not find any nodes, and does not set up any routes.
>>>
>>> BUT: on the neighbor-nodes of the network (the WRT and a Windows-PC with 
>>> olsr) the IP of the Linux-PC is visible in Nodes, but also not in 
>>> Routes.
>>> Also the AP can ping the Linux-PC and the PC can ping the AP, therefore 
>>> the wlan-connection is up. Just no routes :-(
>>>
>>> Any hints on what is wrong here?
>>>
>>> Thanks, Stefan
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> olsr-users mailing list
>>> (spam-protected)
>>> https://www.olsr.org/mailman/listinfo/olsr-users
>>
>>
>>
>> _______________________________________________
>> olsr-users mailing list
>> (spam-protected)
>> https://www.olsr.org/mailman/listinfo/olsr-users
>
>
>
> _______________________________________________
> olsr-users mailing list
> (spam-protected)
> https://www.olsr.org/mailman/listinfo/olsr-users