[OLSR-users] olsrd with 2 networks

[Bernd Petrovitsch]

On Mon, 2006-02-06 at 19:19 +0100, Andreas Tønnesen wrote:
> I take it you are running on one interface? Using 255.255.255.255
> for broadcast should be sufficient in that case.

Hmm, and if I run it on several interfaces (and all of the nets are
equally visible on all interfaces)?
Of course I would use it then in all interface sections.

> Bernd Petrovitsch wrote:
> 
> >How can I use the olsrd with two distinct IPv4 networks (e.g.
> >1.2.3.0/24 and 5.6.7.0/24)?
> >Is it enough to set "Ip4Broadcast" to "255.255.255.255"?

	Bernd
-- 
Firmix Software GmbH                   http://www.firmix.at/
mobil: +43 664 4416156                 fax: +43 1 7890849-55
          Embedded Linux Development and Services