[OLSR-users] Re: Problems with 0.4.10 when changing IP address of the main interface

Joerg Pommnitz (spam-protected)
Tue Apr 18 13:55:11 CEST 2006


Hello Andreas,
digging further into this issue on my own, I think I actually fixed it. Your patch was basically correct, but just a little bit overzealous. Instead of just copying the new address where it belongs (interface and main address) you additionally used it in the comparison against the main address (which prevented the copy to main).
Attached is a less aggressive patch (against ifnet.c from 0.4.10) that "Works for me" (tm).
 
--  Regards 
       Joerg 


Date: Tue, 11 Apr 2006 17:04:45 +0200
From: Andreas T?nnesen <(spam-protected)>
Subject: Re: [OLSR-users] Re: Problems with 0.4.10 when changing IP
    address    of    the main interface
To: OLSR discussion and development <(spam-protected)>
Message-ID: <(spam-protected)>
Content-Type: text/plain; charset="iso-8859-1"

Hi Joerg,

Please try building the current version including the attatched patch 
and see if that
fixes the problem. I'm setting up a new wall here in our new house, so I 
have not
really had time to look very much into the problem ;-) but I think it 
should work
now.

- Andreas





-------------- next part --------------
A non-text attachment was scrubbed...
Name: olsrd.patch
Type: application/octet-stream
Size: 731 bytes
Desc: not available
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20060418/a125f002/attachment.obj>


More information about the Olsr-users mailing list