[OLSR-users] how to insert static routes

Konstantinos Skarlatos (spam-protected)
Wed Nov 9 10:17:37 CET 2005


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Andreas Tønnesen wrote:
> Hi Konstantinos,
> 
>> first of all, all the 255.255.255.255 netmasks are wrong. for example
>> 10.176.9.1 should have a netmask of 255.255.255.128. what should i do
>> for this?
> 
> 
> What do you mean the netmasks are wrong? These are all host routes and
> non-aggregated routes/host routes use netmasks of 255.255.255.255.
>
my mistake, too many hours of work without coffee!

>> also, every router has some static non olsr routes that i want to
>> propagate to the whole network. for example the router who is the owner
>> of the 10.176.4.0 class C subnet has the following route:
>> 10.176.4.224/29 10.176.4.6
>> how can i declare that route? i guess it has something to do with
>> olsrd.conf and the hna, but i havent figured out how to declare a
>> gateway there.
> 
> 
> On the router in question add:
> 
> 
> Hna4
> {
>     10.176.4.224  255.255.255.0
> }
> 
> to the config file
> 
> - Andreas
> 
ok, i'll check it out. i guess i also have to setup the static routes
manually with ip route add or somemthing
> _______________________________________________
> olsr-users mailing list
> (spam-protected)
> https://www.olsr.org/mailman/listinfo/olsr-users
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (MingW32)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFDcb6xDPg0rePeXUwRAvKnAKDYY+HoD1/5od3iybR/DIK5zGxDZwCfQLr8
Zx/TKPRsKXgQkMikAvfEDRM=
=IxS3
-----END PGP SIGNATURE-----




More information about the Olsr-users mailing list