[OLSR-users] OLSRd and sun SPARC platforms

[Daffys neko]

Thanks Jon,

thanks to you, I have seen that I have 3 Sun stations 64 bits, and all
the 386 run with 32 bits.
So the question is now : does SOLSR works with 64 bits ? OLSRD works
with 32 and 64 bits processor, and SOLSR only with 32 bits, right ?

For information I would like to test OLSR on an ethernet network
(easier than wifi).

Thanks again,

On Wed, 16 Mar 2005 12:58:41 +0100, Daffys neko <(spam-protected)> wrote:
> Hi,
> 
> First thanks for your speed Andreas and Jon.
> Jon what do you mean by incompatible between 32 and 64bit
> architechtures ?? SOLSR can't work between two nodes, one with 32bit
> archi and the other with 64 ?
> I think I had only some 32 bit but I will see it this afternoon.
> 
> thanks,
> 
> On Wed, 16 Mar 2005 12:44:07 +0100, Jon Andersson
> <(spam-protected)> wrote:
> > Hi,
> >
> > You didn't specify the SPARC type, but be aware that (at least) one plugin
> > (security) is incompatible between 32 and 64bit architechtures.
> >
> > There does not seem to be any such issues related to the "main" OLSRD.
> >
> > Good luck!
> >
> > Jon
> >
> > >-----Original Message-----
> > >From: (spam-protected) [mailto:(spam-protected)]On
> > >Behalf Of Andreas Tønnesen
> > >Sent: 16. mars 2005 12:07
> > >To: Daffys neko; OLSR discussion and development
> > >Subject: Re: [OLSR-users] OLSRd and sun SPARC platforms
> > >
> > >
> > >Hi,
> > >
> > >As long as it runs Linux and has all common libraries it should be no
> > >problem compiling olsrd on SPARC IMO. Just give it a shot :)
> > >
> > >- Andreas
> > >
> > >> Hello,
> > >>
> > >> I would like to do some tests with olsrd and I have some PC (x86) and
> > >> some SUN stations. I wouls like to use GNU/Debian on both platforms.
> > >>
> > >> I know that olsrd is known to run on x86, ARM, MIPS and PPC platforms.
> > >> But what about SPARC ? I don't think there is something for SPARC
> > >> plaforms ?
> > >>
> > >> Is it hard to compile ? Is it possible ? I have never used some Sun
> > >> stations but I have not enough X86 here so I have to use it.
> > >>
> > >> thanks for your answer.
> > >> Best Regards,
> > >> _______________________________________________
> > >> olsr-users mailing list
> > >> (spam-protected)
> > >> https://www.olsr.org/mailman/listinfo/olsr-users
> > >>
> > >
> > >
> > >---------
> > >Andreas Tønnesen
> > >http://www.olsr.org
> > >_______________________________________________
> > >olsr-users mailing list
> > >(spam-protected)
> > >https://www.olsr.org/mailman/listinfo/olsr-users
> > >
> > >
> >
> > _______________________________________________
> > olsr-users mailing list
> > (spam-protected)
> > https://www.olsr.org/mailman/listinfo/olsr-users
> >
>