[OLSR-users] Dumb setup questions

Andreas Tønnesen (spam-protected)
Thu Jun 9 21:38:16 CEST 2005


Hi,

This question has been asked many, many times before ;)

Either the nodes in your ad-hoc network must have Internet routable
addresses or the gateway must do NAT. Have a look at earlier milinglist
posts.

- Andreas

salsaman wrote:
> Sven-Ola Tuecke wrote:
> 
>> Hi,
>>
>> the HNA4 line announces "Internet HERE!". The additional route will 
>> spread to all clients. Note that you have to *clear* the manual gatway 
>> setting on any client for this to work.
>>
>> Anybody (with a partial understandig what a routing daemon does) is 
>> very fast with hacking "route add default gw blabla" or setting manual 
>> routes which is contraproductive here...
>>
>> Rgds, Sven-Ola
> 
> 
> OK, maybe your explanation was not so clear.
> 
> On node 1 (gateway machine) I have default gateway to set to 192.168.1.1 
> on the second card.
> 
> On node 2 (client) I have removed all gateways, so that the only entry 
> left is host node 1.
> 
> 
> When I try to ping an address on the net from node 2, I get "network 
> unreachable".
> 
> 
> 
> What am I doing wrong ?
> 
> Salsaman.
> 
> _______________________________________________
> olsr-users mailing list
> (spam-protected)
> https://www.olsr.org/mailman/listinfo/olsr-users

-- 
Andreas Tønnesen
http://www.olsr.org



More information about the Olsr-users mailing list