[OLSR-users] Dot Draw segfaults on mipsel

[John Gorkos]

More info:
(spam-protected):/lib# olsrd -f /etc/olsrd.conf -d 1

 *** olsr.org - 0.4.8-pre ***
 Build date: Dec  3 2004
 http://www.olsr.org

Parsing file: "/etc/olsrd.conf"
 *** olsrd configuration ***
Debug Level      : 1
IpVersion        : 4
No interfaces    : ALLOWED
TOS              : 0x10
Willingness      : AUTO
IPC connections  : 1
        Host 127.0.0.1
Pollrate         : 0.05
TC redundancy    : 0
MPR coverage     : 1
LQ level         : 0
LQ window size   : 10
Clear screen     : no
Interfaces:
 dev: "eth1"
        IPv4 broadcast           : AUTO
        IPv6 addrtype            : site-local
        IPv6 multicast site/glbl : ff05::15/ff0e::1
        HELLO emission/validity  : 2.00/6.00
        TC emission/validity     : 5.00/15.00
        MID emission/validity    : 5.00/15.00
        HNA emission/validity    : 5.00/15.00
Plugins:
        Name: "olsrd_dot_draw.so.0.3"
Using hysteresis:
        Scaling      : 0.50
        Thr high/low : 0.80/0.30
HNA4 entries:
        0.0.0.0/0.0.0.0
Could not read APM info - setting default willingness(3)
Using IP version 4

 ---- Interface configuration ----

Checking eth1:
        Wireless interface detected
        MTU: 1500
        Interface eth1 set up for use with index 0
        Address:192.168.7.1
        Netmask:255.255.255.0
        Broadcast address:192.168.7.255
Adding OLSR socket entry 6
New main address: 192.168.7.1
Adding OLSR socket entry 7
Loading plugins...

---------- Plugin loader ----------
Library: olsrd_dot_draw.so.0.3
OLSRD dot draw plugin 0.3 by Andreas Tønnesen
Checking plugin interface version.... 2 - OK
Trying to fetch register function....OK
Trying to fetch plugin IO function....OK
Trying to fetch param function....OK
Sending parameters...
Running registration function...
Registering pcf function
Adding OLSR socket entry 8
---------- LIBRARY LOADED ----------

Main address: 192.168.7.1

Scheduler started - polling every 0.05 seconds
Willingness for 192.168.7.28 changed from 0 to 3 - UPDATING

--- 21:12:30.78 ---------------------------------------------------- LINKS

IP address       hyst   LQ     lost   total  NLQ    ETX
192.168.7.28     0.000  0.000  0      0      0.000  0.00

--- 21:12:30.78 ------------------------------------------------ NEIGHBORS

IP address       LQ     NLQ    SYM   MPR   MPRS  will
192.168.7.28     0.000  0.000  NO    NO    NO    3
Segmentation fault


On Friday 03 December 2004 15:10, John Gorkos wrote:
> Gang-
>   Due to a radio failure, I had to restructure my network in a hurry.  Now,
> instead of the x86 PC I was using as a gateway, I've got a WRT54GS router
> in place, with the internet connected to vlan0 and the mesh on eth1.  The
> problem I'm getting is that dot_draw segfaults on startup.
>
> the dot_draw plugin would segfault on initialization in .4.7, and makes it
> through initialization and then segfaults when the first connection is made
> under CVS .4.8.
>
> Does anyone have a working dot_draw plugin compiled for mipsel
> architecture? For better or worse, it has become a critical part of my
> network management suite and not having it really puts a crimp on my
> ability to effective manage my network.
>
> John Gorkos
> _______________________________________________
> olsr-users mailing list
> (spam-protected)
> https://www.olsr.org/mailman/listinfo/olsr-users