[OLSR-users] Re: RE :

Andreas Tønnesen (spam-protected)
Wed Apr 21 22:44:18 CEST 2004


Hmmm... I seem to remember having delt with this problem before.

I am CCing this to the olsr-users list. Perhaps somebody else has
experienced the same problem?

Please direct olsrd related questions to the mailinglist ;)

- Andreas

zze-GALLET DE SANTERRE Etienne FTRD/DMR/ISS wrote:
> Hi,
> 
> First, I solve my problem with the GUI, it was just I forgot I had some iptables rules and I forgot to accept the localhost, so it was impossible to connect. Now it works well again.
> About the route to ff05::15, I don't have it when OLSRd doesn't run, it appears once OLSRd is launched and stay in the routing table. There is another route which appears when OLSRd runs, a route to ff02::1.
> What is the problem with these routes?
> 
> Etienne GALLET DE SANTERRE
> 
> -----Message d'origine-----
> De : Andreas Tønnesen [mailto:(spam-protected)] 
> Envoyé : mercredi 21 avril 2004 15:54
> À : zze-GALLET DE SANTERRE Etienne FTRD/DMR/ISS
> Objet : Re: 
> 
> 
> Hi,
> 
> First about the GUI problem: Have you set IPC-CONNECT to yes in the 
> config file?
> 
> Now to the real problem. It seems there are problems with the multicast 
> socket
> on which control traffic is transmitted. This uses the address ff05::15. This seems very strange - is a route to ff05::15 added for the eth1 
> interface?
> This should automatically be set up when the interface joins the 
> multicast sender
> group AFASK...
> 
> - Andreas T
> 
> zze-GALLET DE SANTERRE Etienne FTRD/DMR/ISS wrote:
> 
> 
>>Good afternoon Mr Tønnesen,
>>
>>I'm using the Unik-OLSR protocol on my wireless platform, it runs very
>>well with IPv4 but it doesn't with IPv6 and I don't understand why.
>>
>>All my computers are on Redhat 9 with kernel 2.4.20-8
>>My version of OLSR is 0.4.3 used with IPv6
>>I don't want to send HNA messages yet but later I will probably have
>>to send them.
>>Here are the logs with a debug level 6:
>>
>><<log_olsr.txt>>
>>Could you tell me what you think about my problem?
>>
>>Another problem I have (a very less important problem) is that I don't
>>succeed in starting the GUI to see the informations OLSRd knows. It 
>>writes "impossible to connect localhost". This problem is when I use 
>>OLSRd with IPv4 (I didn't test GUI with IPv6 yet, but I think it's 
>>useless if I haven't any information about neighboorhood just with OLSRd).
>>
>>Thank you for your help
>>
>>
>>Etienne Gallet de Santerre
>>
>>-----------------------------------------------------------------------
>>-
>>
>>[(spam-protected) unik-olsrd-0.4.3]# olsrd -d 6
>>
>>	*** UniK olsrd-0.4.3 ***
>>http://www.olsr.org
>>
>>
>>IP forwarding is enabled on this system
>>Initializing parser...
>>Parser: registering event for type 1
>>Register parse function: Added function for type 1
>>Parser: registering event for type 2
>>Register parse function: Added function for type 2
>>Parser: registering event for type 3
>>Register parse function: Added function for type 3
>>Parser: registering event for type 4
>>Register parse function: Added function for type 4
>>
>>hello interval = 2.00       hello int nonwireless = 4.00
>>tc interval = 5.00          polling interval = 0.10
>>neighbor_hold_time = 6.00   neighbor_hold_time_nw = 12.00
>>topology_hold_time = 15.00  tos setting = 16
>>hna_interval = 10.00         mid_interval = 5.00
>>tc_redunadancy = 0          mpr coverage = 1
>>hysteresis scaling factor = 0.50
>>hysteresis threshold high = 0.80
>>hysteresis threshold low  = 0.30
>>
>>Using broadcastaddresses fetched from interfaces
>>Initializing APM
>>APM info:
>>       Kernel driver ?
>>B8?H??(APM BIOS 134552234.134598048)
>>       Flags:0x-1073756088
>>       AC status -1073751832
>>       Battery status 134533826
>>       Battery flags 0x00000001
>>       Battery percentage -1073756088%
>>       Battery time left: -1073751832 min
>>
>>Battery powered system detected - currently running on AC power 
>>Willingness set to 3 - next update in 20.000000 secs Using IP version 6
>>Using multicast address ff05::15
>>
>>---- Interface configuration ----
>>
>>eth1:
>>       Flags: 00401043
>>       Wireless interface detected
>>       inet6 addr: 2001:0688:1f88:400a:0000:0000:0000:0ad1
>>       Scope:  inet6 addr: fe80:0000:0000:0000:020f:8fff:fec3:53f3
>>       Scope:  Could not find site-local IPv6 address for eth1
>>       inet6 addr: 2001:0688:1f88:400a:0000:0000:0000:0ad1
>>       Scope:IPv6 addr:
>>       Address: 2001:688:1f88:400a::ad1
>>       Multicast: ff05::15
>>       Interface eth1 set up for use with index 0
>>
>>Parser: registering event for type -1
>>Register parse function: Added function for type -1
>>
>>Front-end accept thread initiated(socket 3)
>>
>>
>>Determening IP addresses and initializing sockets:
>>       interface eth1...ADDRSOCK: 2001:688:1f88:400a::ad1 Interface 
>>eth1 joining multicast ff05::15...OK Adding OLSR socket entry 5
>>
>>Main address: 2001:688:1f88:400a::ad1
>>NEIGHBORS: l=linkstate, m=MPR, w=willingness
>>Initializing duplicatetable - hashsize 32
>>TC: init topo
>>MPRS: Init
>>MID: init
>>Loading plugins...
>>
>>Scheduler started - polling every 0.10 seconds
>>Max jitter is 0.500000
>>
>>neighbor list: 11:37:36.384779
>>topology table: 11:37:36.384779
>>
>>MPR SELECTORS:
>>mid set: 11:37:36.384779
>>
>>DUP TABLE:
>>
>>       Building HELLO on interface 0
>>sendto(v6): Cannot assign requested address
>>Socket: 5 interface: 0
>>To: ff05::15 (size: 28)
>>Outputsize: 32
>>SOCKETS: 5
>>neighbor list: 11:37:38.251915
>>topology table: 11:37:38.251915
>>
>>MPR SELECTORS:
>>mid set: 11:37:38.251915
>>
>>DUP TABLE:
>>
>>       Building HELLO on interface 0
>>sendto(v6): Cannot assign requested address
>>Socket: 5 interface: 0
>>To: ff05::15 (size: 28)
>>Outputsize: 32
>>neighbor list: 11:37:40.011943
>>topology table: 11:37:40.011943
>>
>>MPR SELECTORS:
>>mid set: 11:37:40.011943
>>
>>DUP TABLE:
>>
>>       Building HELLO on interface 0
>>sendto(v6): Cannot assign requested address
>>Socket: 5 interface: 0
>>To: ff05::15 (size: 28)
>>Outputsize: 32
>>       Building HELLO on interface 0
>>sendto(v6): Cannot assign requested address
>>Socket: 5 interface: 0
>>To: ff05::15 (size: 28)
>>Outputsize: 32
>>neighbor list: 11:37:42.101921
>>topology table: 11:37:42.101921
>>
>>MPR SELECTORS:
>>mid set: 11:37:42.101921
>>
>>DUP TABLE:
>>
>>Received signal 2 - shutting down
>>Deleting all routes...
>>HNA list:
>>Route list:
>>Closing sockets...
>>
>><<<< UniK olsrd-0.4.3 - terminating >>>>
>>
> 

-- 

-- 
Andreas Tønnesen((spam-protected))
UniK University Graduation Center
University of Oslo
http://www.olsr.org




More information about the Olsr-users mailing list