[Olsr-dev] OLSRv2 release version 0.3.0

[Teco Boot]

Try to follow…

If you tcpdump and don't catch ARP requests, it is sub-IP.
Do you have arp entries?
Please send info from both nodes, iw/iwconfig and ifconfig.
And arp -an and tcpdump during ping.
If ARP is OK and no firewall, IP should run.

Teco


Op 23 sep. 2013, om 16:10 heeft Syed Salman Haider Rizvi <(spam-protected)> het volgende geschreven:

> 
> Well i run the tcpdump on both routers (wlan0) and output is shown below on one of the router and ip for both wlan0 are different 
> 
> 
> Also  pinging is not working on any of the router . Also want to i ask i m running on backfire on my router will changing to backfire to attitute adjustment (on which i compiled) make any difference ?
> 
> Thanks 
> 
> (spam-protected):~# tcpdump -i wlan0 -vv
> 
> tcpdump: listening on wlan0, link-type EN10MB (Ethernet), capture size 65535 bytes
> 00:02:44.426806 IP (tos 0x0, ttl 1, id 0, offset 0, flags [DF], proto UDP (17), length 70)
>     10.0.1.8.269 > 224.0.0.109.269: [udp sum ok] UDP, length 42
> 00:02:46.526935 IP (tos 0x0, ttl 1, id 0, offset 0, flags [DF], proto UDP (17), length 70)
>     10.0.1.8.269 > 224.0.0.109.269: [udp sum ok] UDP, length 42
> 00:02:48.627019 IP (tos 0x0, ttl 1, id 0, offset 0, flags [DF], proto UDP (17), length 70)
>     10.0.1.8.269 > 224.0.0.109.269: [udp sum ok] UDP, length 42
> 00:02:50.727818 IP (tos 0x0, ttl 1, id 0, offset 0, flags [DF], proto UDP (17), length 70)
>     10.0.1.8.269 > 224.0.0.109.269: [udp sum ok] UDP, length 42
> 
> > I assume you have configured the new IP addresses (different ones) on
> > both wlan0 interfaces.
> > 
> > one of them (according to an earlier mail) was 10.0.1.9/24.
> > 
> > What is the output of the ping on the other side? Maybe tcpdump running
> > on both sides could help you to debug the problem.
> 
>  
> -- 
> Olsr-dev mailing list
> (spam-protected)
> https://lists.olsr.org/mailman/listinfo/olsr-dev