[Olsr-dev] IPv6 & interface detection
Tue Jun 5 18:29:59 CEST 2012
On 05.06.2012 17:48, Ferry Huberts wrote:
> Hi guys
> I'm running some tests on PUD to see whether it works on IPv6 and see
> the following:
>> No interfaces detected! This might be intentional, but it also might
>> mean that your configuration is fubar.
> I have configured my em1 (=eth0) as the olsr interface and the kernel
> says it runs IPv4 and IPv6:
>> em1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
>> inet 172.16.4.96 netmask 255.255.255.0 broadcast 172.16.4.255
>> inet6 fe80::f2de:f1ff:fe8a:7f9 prefixlen 64 scopeid 0x20<link>
>> ether f0:de:f1:8a:07:f9 txqueuelen 1000 (Ethernet)
>> RX packets 20757585 bytes 10644069226 (9.9 GiB)
>> RX errors 0 dropped 0 overruns 0 frame 0
>> TX packets 31816761 bytes 42145281687 (39.2 GiB)
>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>> device interrupt 20 memory 0xf2600000-f2620000
> I'm not expecting the error I'm seeing.
> Anybody an idea why olsrd doesn't see my interface as IPv6 capable?
> (IPv4 works fine)
> PS. sorry if this might postpone the release again ;-)
I think you must configure the interface with a non-link local ipv6 address.
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 198 bytes
Desc: OpenPGP digital signature
More information about the Olsr-dev