[Olsr-dev] IPv6 & interface detection

[Ferry Huberts]

Hi guys

I'm running some tests on PUD to see whether it works on IPv6 and see 
the following:

> No interfaces detected! This might be intentional, but it also might mean that your configuration is fubar.

I have configured my em1 (=eth0) as the olsr interface and the kernel 
says it runs IPv4 and IPv6:

> em1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
>         inet 172.16.4.96  netmask 255.255.255.0  broadcast 172.16.4.255
>         inet6 fe80::f2de:f1ff:fe8a:7f9  prefixlen 64  scopeid 0x20<link>
>         ether f0:de:f1:8a:07:f9  txqueuelen 1000  (Ethernet)
>         RX packets 20757585  bytes 10644069226 (9.9 GiB)
>         RX errors 0  dropped 0  overruns 0  frame 0
>         TX packets 31816761  bytes 42145281687 (39.2 GiB)
>         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
>         device interrupt 20  memory 0xf2600000-f2620000


I'm not expecting the error I'm seeing.
Anybody an idea why olsrd doesn't see my interface as IPv6 capable?
(IPv4 works fine)

PS. sorry if this might postpone the release again ;-)
-- 
Ferry Huberts