[Olsr-dev] gateway code

[Henning Rogge]

On 07/24/2012 01:15 PM, Teco Boot wrote:
>> Has been some time since I even looked into this code... the code
>> you removed were responsible for detecting a tunnel going down and
>> up again (because I thought it is necessary to set the route into
>> the tunnel again).
>>
>> Its not really common, but could be potential annoying.
>>
>> Can you test if what happens to the smart-gw if you take a tunnel
>> down and up again from the shell?
>
> Manual interference with unmanaged tunnels is a request for trouble.
> If there is a side effect on tunnel_down (e.g. removed routes), that
> is how it is designed. Let's have a clean smart-gw.

At the moment there would be no way to restore the route for the tunnel. 
That is why the mechanism was inside.

Similar for mesh interfaces, if they go up again, OLSRd must restore the 
routes.

Henning

-- 
Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
Kommunikation, Informationsverarbeitung und Ergonomie FKIE
Kommunikationssysteme (KOM)
Neuenahrer Straße 20, 53343 Wachtberg, Germany
Telefon +49 228 9435-961,   Fax +49 228 9435 685
mailto:(spam-protected) http://www.fkie.fraunhofer.de
GPG: E1C6 0914 490B 3909 D944 F80D 4487 C67C 55EC CFE0

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 6169 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.olsr.org/pipermail/olsr-dev/attachments/20120724/13825e3c/attachment.bin>