[Olsr-dev] dynamic runtime config of olsrd

[Teco Boot]

Op 12 apr. 2012, om 07:25 heeft Henning Rogge het volgende geschreven:

> On 04/12/2012 04:26 AM, Hans-Christoph Steiner wrote:
>> 
>> I'm wondering what's the best example for dynamic configuration of
>> olsrd? The only example I could find is the httpinfo ADMIN_INTERFACE,
>> which  seems to have been abandoned years ago.
> Yes, the HTTPINFO plugin in general and especially the admin interface is in a really bad shape because nobody used it for years. It cannot handle multiple concurrent accesses well, it consumes quite a lot of memory and the its not that useful.
> 
>> Is anyone doing dynamic configuration of olsrd at runtime?  Is this
>> not at all useful?
> At the moment OLSRd (neither stable nor development branch) is prepared
> for any kind of configuration change during runtime. The only thing that
> is dynamic is the IPs of the interfaces, which are scanned by OLSRd
> during runtime.
And up/down status.
Just preconfigure tons of tunnels....
Or better, use a multi-point tunnel interface.

Teco


> 
> The new OLSRd (v2) I am working on should resolve the problem, but doing
> it for the current one will be quite a lot of work.
> 
> Henning Rogge
> 
> -- 
> Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
> Kommunikation, Informationsverarbeitung und Ergonomie FKIE
> Kommunikationssysteme (KOM)
> Neuenahrer Straße 20, 53343 Wachtberg, Germany
> Telefon +49 228 9435-961,   Fax +49 228 9435 685
> mailto:(spam-protected) http://www.fkie.fraunhofer.de
> GPG: E1C6 0914 490B 3909 D944 F80D 4487 C67C 55EC CFE0
> 
> -- 
> Olsr-dev mailing list
> (spam-protected)
> https://lists.olsr.org/mailman/listinfo/olsr-dev