[Olsr-dev] Problems with SmartGateway

[Teco Boot]

Op 27 aug 2011, om 11:04 heeft Markus Kittenberger het volgende geschreven:

> ok this looks like a bug,..
> 
> On Fri, Aug 26, 2011 at 4:12 PM, Teco Boot <(spam-protected)> wrote:
> 
> Syslog:
> =======
> Aug 26 13:15:25 AHR-175-169 olsrd[2199]: Received netlink error code Invalid argument (-22)
> Aug 26 13:15:26 AHR-175-169 olsrd[2199]: . error: add route to 0.0.0.0/0.0.0.0 via 0.0.0.0 dev void onlink (Resource temporarily unavailable 11)
> hmm dev void !?
> 
> does olsrd even succesfully create a (smartgateway) tunnel in your setup?
Yes, it does.
Tunnel name corresponds to GW adress

tnl_adaf1fac Link encap:IPIP Tunnel  HWaddr   
          inet addr:172.31.175.169  P-t-P:172.31.175.169  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP  MTU:1480  Metric:1
          RX packets:7401 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:1013663 (989.9 KiB)  TX bytes:0 (0.0 B)

Table: Gateways
Status  Gateway IP      ETX     Hopcnt  Uplink  Downlnk IPv4    IPv6    Prefix
s-      172.31.175.173  1.000   1       120     1000    ipv4(n) -       -

> if so it seemed managed to forget its "name",..
Yes, tunnel name should not be "void".
Could be bug in code for display this message...

Teco

> 
> Markus