[Olsr-dev] Idea for small OLSR improvement

[Sven-Ola Tuecke]

Hey,

Mitar better fixes his madwifi setup. The first 3 letters of the driver name 
says it all. Try "wlanconfig ath0 create wlandev wifi0 wlanmode adhoc 
nosbeacon"

[ provided that he has the patchset from openwrt/kamikaze together with the 
new HAL in place. Verify HAL with "dmesg" after the "insmod ath_pci". That 
really should read "Atheros HAL provided by OpenWrt, DD-WRT and MakSat 
Technologies". Otherwise it's best to throw away router & buy another one 
with a working wifi driver ]

Dead link - remove route after timeout. That's simple enough and should 
really stay that way.

// Sven-Ola

----- Original Message ----- 
From: "ZioPRoTo (Saverio Proto)" <(spam-protected)>
To: "Mitar" <(spam-protected)>
Cc: <(spam-protected)>
Sent: Monday, April 26, 2010 3:07 PM
Subject: Re: [Olsr-dev] Idea for small OLSR improvement


>> choosing the best route. But once node has only one peering node and
>> it decides to remove route to it then I would recommend that we leave
>> it in place as it has the highest probability that this same route
>> will be restored (especially when nodes have fixed locations). And
>
> Without modify the routing protocol, if you know that one node has a
> fixed location and probably has 1 wireless link, just add a static
> default route to that neighbor node in addition to the routes that
> OLSR will add to the kernel.
>
> This should be enough ?
>
> Saverio
>
> -- 
> Olsr-dev mailing list
> (spam-protected)
> http://lists.olsr.org/mailman/listinfo/olsr-dev