[Olsr-dev] Looking for developer feedback on olsrd.conf values

L. Aaron Kaplan (spam-protected)
Wed Dec 23 15:44:27 CET 2009

Well, to be fair, we probably have to add that in most Freifunk/Funkfeuer networks FishEye was always turned on, so these code paths are for sure better tested.

My 2 cents,

On Dec 23, 2009, at 12:56 PM, Markus Kittenberger wrote:

> On Tue, Dec 22, 2009 at 11:42 PM, Fred Moyer <(spam-protected)> wrote:
> On Tue, Dec 22, 2009 at 2:28 PM, Markus Kittenberger
> <(spam-protected)> wrote:
> > i think the best solution is to do QOS on your links, and priorize olsr
> > traffic above antything else
> I'm going to be implementing that but wanted to make sure my config
> values were not wildly out of whack to start with.
> i looked at the config now, did you write it (especially the comments) yourself, or did u find this configuration somewhere?
> for the smaller ones turn it off, without thinking about it
> i think 200 nodes will still be quite well manageable without fisheye, depends on your message intervals, and how much bandwidth you are willing to let olsr use,.. (or how fast your slowest links are)

> Olsr-dev mailing list
> (spam-protected)
> http://lists.olsr.org/mailman/listinfo/olsr-dev

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-dev/attachments/20091223/95322bb1/attachment.html>

More information about the Olsr-dev mailing list