[olsr-dev] Re: cpu load?

[aaron]

actually i was logged in to "subway" at that time (= the pc)
and on the pc everything seemd fine. but i just could not reconnect anymore
that was one observation.

and actually, I rebooted a few linksyses. not only the pc.
olsrd restart also seemed to help.

it is just weird that this problem seems to occur regularly now.
the (ethernet) network was ok though. i was logged into a machine sitting
right next to the olsrd PC. No problem there (but it was not running olsrd)


> 
> here is the output of top on the "problem node":
> ---cut---
> Mem: 10272K used, 3984K free, 0K shrd, 1152K buff, 3032K cached
> Load average: 0.22, 0.19, 0.18    (State: S=sleeping R=running, W=waiting)
> 
>   PID USER     STATUS   RSS  PPID %CPU %MEM COMMAND
>   342 root     R        632     1 47.0  4.4 olsrd
>  8593 root     R        396  8590  3.8  2.7 top

that could still be normal. top on the linksys still reports high cpu load sometimes. and it did that before. (i.e. remember the times with olsrd IPv4 * olsrd IPv6 running in parallel and nothing worked anymore :)

and the network grew in the last few months.

so i expect higher cpu load.
hm, i will trim down some intervalls to make it less of a cpu pig :)

>  8589 root     S        612   320  0.0  4.2 dropbear
>  8590 root     S        472  8589  0.0  3.3 sh
>   332 root     S        412     1  0.0  2.8 olsrd-reanimato
>   320 root     S        372     1  0.0  2.6 dropbear
>     1 root     S        372     0  0.0  2.6 init
>   360 root     S        372     1  0.0  2.6 init
>   313 root     S        356     1  0.0  2.4 httpd
>    43 root     S        340     1  0.0  2.3 syslogd
>    42 root     S        296     1  0.0  2.0 klogd
>  8588 root     S        240   332  0.0  1.6 sleep
>     3 root     SWN        0     1  0.0  0.0 ksoftirqd_CPU0
>     7 root     SW         0     1  0.0  0.0 mtdblockd
>     2 root     SW         0     1  0.0  0.0 keventd
>    18 root     SWN        0     1  0.0  0.0 jffs2_gcd_mtd4
>     4 root     SW         0     1  0.0  0.0 kswapd
>     5 root     SW         0     1  0.0  0.0 bdflush
>     6 root     SW         0     1  0.0  0.0 kupdated
> ---cut---
> 
> hope that helps.
> bye.
> _______________________________________________
> olsr-dev mailing list
> (spam-protected)
> https://www.olsr.org/mailman/listinfo/olsr-dev
> 

--