[Olsr-users] please help

[Michel Blais]

We would need at less ifconfig output and config file to begin.

Michel

Le 2012-02-09 15:03, (spam-protected) a écrit :
> My bad.... been working on this issue for a week and im starting to 
> loose it :p
>
> My problem is that I am unable to get the three nodes to communicate 
> to each other via the mesh interface with olsr. Olsr loads fine and is 
> running in the background. Currently, I have a alix.3D3 sbc with 2 
> wistron dnma-92 cards on it and using the current build of cdma, olsr 
> and iw tools. Ive even tried to get the cards to go ad-hoc and they 
> finally say they have joined the same cell, but I am unable to ping 
> anything and when I take down the hard link, I eventually have to 
> restart the appliance because, i do not have a monito and kbd near it.
>
>
> *----- Original Message -----*
> *From:* Hans-Christoph Steiner [mailto:(spam-protected)]
> *To:* (spam-protected)
> *Sent:* Thu, 09 Feb 2012 14:47:56 -0500
> *Subject:* Re: [Olsr-users] please help
>
>
> Actually, if you provide some information about your setup, then lots of
> regular linux people can help you.  :)  You will need a god to help you
> if you expect them to magically know all that stuff ;)
>
> More info is better than less.
>
> .hc
>
> On 02/09/2012 02:39 PM, (spam-protected) <#> wrote:
> > I am attempting to get 3 appliances to communicate with each oth and i
> > am not having the best of luck. I need a Linux GOD to help me out PLEASE
> > !!!!!!.
> >
> > Thanks,
> > John
> >
> >
>
> -- 
> Olsr-users mailing list
> (spam-protected) <#>
> https://lists.olsr.org/mailman/listinfo/olsr-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20120209/75ac873c/attachment.html>