[Olsr-users] OLSRv2 Missing route to lan

Henning Rogge (spam-protected)
Mon Oct 15 10:26:42 CEST 2018

On Wed, Oct 3, 2018 at 6:37 PM Gabriel <(spam-protected)> wrote:
> Il 2018-10-03 15:43 Henning Rogge ha scritto:
> > do you see the LANs on each LOCAL routing when sending a "/olsrv2info
> > lan" command to the telnet port?
> Yes.
> A:
>       0       ff_dat_metric   2Gbit/s 1       2
> B:
>       0       ff_dat_metric   2Gbit/s 1       2
> C:
>       0       ff_dat_metric   2Gbit/s 1       2
>       0       ff_dat_metric   2Gbit/s 1       2
> I forgot to mention that the route for A is also absent from all the
> nodes connected in chain after C, but it's present in other nodes
> connected to B.
> I think it can be related to the numeber of hops >= 2.

Sounds like NHDP (the Hello protocol) is working but OLSRv2 is not...
NHDP should give you routes to the local addresses of your neighbors,
but not to nodes further away and not to attached networks.

Is there something special about the link between A and B?

If I get your setup correctly you are connecting through a ubiquity
access point... if yes, which one of your nodes is the AP and are the
clients "isolated" from each other?


More information about the Olsr-users mailing list