[Olsr-users] (no subject)
Tue May 16 09:37:48 CEST 2017
wpci0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
wpci0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen
I have no idea what these numbers mean, but they sure are different
Gigabit Gecko Ltd
FREE Password Helper: http://www.gigabit-gecko.com/
On Mon, May 15, 2017 at 11:58 PM, Henning Rogge <(spam-protected)> wrote:
> On Tue, May 16, 2017 at 8:55 AM, Lonnie Nunweiler
> <(spam-protected)> wrote:
> > There are no errors generated. It all connects just to port 698. All
> > devices are found and it seems to have full knowledge of them all. In
> > client mode it has no issue and it all works. In AP mode it refuses to
> > the hellos, identified by seeing nothing with tcpdump at the client.
> > Not sure how to fix it. My skill level is like advanced mechanic
> level. I
> > can swap out an engine, but when something internal is awry I'm
> screwed. I
> > have updated the driver through 3 revisions and I have updated the kernel
> > from 3.10.58 to 3.18.45. I won't say it was easy but I did it and it
> > If there was a deep kernel issue I would be in the same boat.
> > Now I am swapping the qca driver for the ath9k and it is working. It
> > not have the performance and I have a lot of enhancements to add, but
> > works just fine, so I have to go with it.
> What does "ip link" say about the interface when the link is up?
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Olsr-users