[Olsr-users] Olsr_dot_draw plugin runs only once, why ?
Abubakr Ali
(spam-protected)
Thu Feb 19 13:22:14 CET 2015
@Saverio: The "git log -- lib/dot_draw/" shows me nothing .. !!
On 19 February 2015 at 12:10, Abubakr Ali <(spam-protected)> wrote:
> Hi Saverio,
>
> Now, I'm trying to fix some git-command errors to run the log option ...
>
> But, I am running olsrd_dot_draw.s0.0.3 alongside OLSRd v.0.6.6.2 on
> Ubuntu v.12.04 LTS.
> Does these versions have any incompatibility issues or conflicts with each
> others ?!
>
> Regards,
> Abubakr
>
> On 18 February 2015 at 20:53, Saverio Proto <(spam-protected)> wrote:
>
>> If you do
>>
>> git log -- lib/dot_draw/
>>
>> you can see that is very few commits touching that code.
>>
>> we fixed a similar bug in 2010, look at commit:
>> 34197cc4ac2d85d2b29ccc35c37faecbae5f3384
>>
>> Abubakr Ali: are you sure you are running the latest version also of
>> the plugin ?
>> What Linux version are you in ? Is possible that you are running olsrd
>> of one version and outdated plugins of another version ?
>>
>> Saverio
>>
>> 2015-02-18 18:10 GMT+01:00 Ferry Huberts <(spam-protected)>:
>> > Can you bisect the commit the broke it please?
>> >
>> >
>> > On 18/02/15 17:49, Abubakr Ali wrote:
>> >>
>> >> Hi Henning,
>> >>
>> >> Unfortunately, commenting the "if()" block didn't work. But thanks
>> anyway.
>> >> I tried another solution of changing the condition at line 303 from "(
>> >> result <= 0 )" to "( result < 0 )" based on this post
>> >>
>> >> <
>> http://t27544.network-olsr-development.networktalks.info/dot-draw-plugin-closing-connection-t27544.html
>> >.
>> >> But, again, it was another fail attempt.
>> >>
>> >> Now I am out of solutions...
>> >>
>> >> Regards,
>> >> Abubakr
>> >>
>> >>
>> >> On 17 February 2015 at 14:37, Henning Rogge <(spam-protected)
>> >> <mailto:(spam-protected)>> wrote:
>> >>
>> >> Could you just go into the lib/dotdraw/src/olsrd_dot_draw.c file
>> and
>> >> remove the if() block from line 312 to line 319?
>> >>
>> >> This might fix your issue.
>> >>
>> >> Henning
>> >>
>> >> On Tue, Feb 17, 2015 at 3:25 PM, Abubakr Ali <
>> (spam-protected)
>> >> <mailto:(spam-protected)>> wrote:
>> >> > Well, I see the following output :
>> >> >
>> >> > Connected to 10.2.70.108...
>> >> > Escape character is ']'.
>> >> > disgraph topolopgy
>> >> > {
>> >> > "10.2.70.108" -> "10.2.70.104"[label="0.000", style=sold];
>> >> > "10.2.70.108" [shape=box];
>> >> > }
>> >> >
>> >> > Connection closed by foreign host.
>> >> >
>> >> > Thant is it !! .. no constant flow of data. Only this data. to
>> >> see another
>> >> > instance of the result, I have to run the command again.
>> >> >
>> >> > On 16 February 2015 at 07:16, Saverio Proto <(spam-protected)
>> >> <mailto:(spam-protected)>> wrote:
>> >> >>
>> >> >> if you just do
>> >> >>
>> >> >> telnet ipaddress 2004
>> >> >>
>> >> >> do you see a constant flow of data from the dot draw plugin ?
>> >> >>
>> >> >> Saverio
>> >> >>
>> >> >> 2015-02-15 15:09 GMT+01:00 Abubakr Ali <(spam-protected)
>> >> <mailto:(spam-protected)>>:
>> >> >> > Thank you Saverio for the tip ...
>> >> >> >
>> >> >> > About the version I'm running OLSRd v:0.6.6.2. The OLSRd
>> itself
>> >> is
>> >> >> > running
>> >> >> > fine and as expected. Therefore, I don't think it's a matter
>> >> of OLSRd
>> >> >> > configuration. However, the Osr Dot Draw plugin is the
>> >> problem, and here
>> >> >> > is
>> >> >> > configuration part for it in the olsrd.conf file:
>> >> >> >
>> >> >> > LoadPlugin "olsrd_dot_draw.so.0.3"
>> >> >> > {
>> >> >> > PlParam "accept" "10.2.70.108"
>> >> >> > PiParam "port" "2004"
>> >> >> > }
>> >> >> >
>> >> >> > Any suggestions !!
>> >> >> >
>> >> >> > Thank you,
>> >> >> > Abubakr
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> > On 14 February 2015 at 19:43, Saverio Proto
>> >> <(spam-protected) <mailto:(spam-protected)>> wrote:
>> >> >> >>
>> >> >> >> What version of olsrd are you running ?
>> >> >> >>
>> >> >> >> When you ask a question always say which version are you
>> >> running and
>> >> >> >> attach relevant config files.
>> >> >> >>
>> >> >> >> Saverio
>> >> >> >>
>> >> >> >> 2015-02-13 17:04 GMT+01:00 Abubakr Ali
>> >> <(spam-protected) <mailto:(spam-protected)>>:
>> >> >> >> > Hi All,
>> >> >> >> >
>> >> >> >> > Whenever I run the "./olsr-topology-mesh-lab.pl
>> >> <http://olsr-topology-mesh-lab.pl>" command, everything
>> >>
>> >> >> >> > works
>> >> >> >> > fine showing the network topology map. Then after a second
>> >> or so, the
>> >> >> >> > command exit with the message "connection closed" while
>> the
>> >> map still
>> >> >> >> > there.
>> >> >> >> > The map doesn't change at all. It is static, i.e.: one
>> >> picture one
>> >> >> >> > ImageMagick window. If I need to see the topology changes,
>> >> then I
>> >> >> >> > have
>> >> >> >> > to
>> >> >> >> > run the command again. But, again, "connection closed"
>> >> message and
>> >> >> >> > static
>> >> >> >> > picture of a network topology.
>> >> >> >> >
>> >> >> >> > As far as the command's help-text states, it should run
>> for
>> >> ever
>> >> >> >> > unless
>> >> >> >> > I
>> >> >> >> > stated the option "--once".
>> >> >> >> >
>> >> >> >> > does that mean it will and keep on producing images and
>> >> showing it on
>> >> >> >> > ImageMagic window ? or does it mean something else ?
>> >> >> >> >
>> >> >> >> > Is there is any solution or any way that keep the
>> >> ImageMagick showing
>> >> >> >> > images
>> >> >> >> > every second or two showing my network topology. Even
>> >> though if the
>> >> >> >> > topology
>> >> >> >> > does not change, I am still want ImageMagick to keep
>> >> showing me a new
>> >> >> >> > image
>> >> >> >> > every 1 or 2 seconds .
>> >> >> >> >
>> >> >> >> >
>> >> >> >> > Thank you
>> >> >> >> > Abubakr
>> >> >> >> >
>> >> >> >> >
>> >> >> >> > --
>> >> >> >> > Olsr-users mailing list
>> >> >> >> > (spam-protected) <mailto:
>> (spam-protected)>
>> >> >> >> > https://lists.olsr.org/mailman/listinfo/olsr-users
>> >> >> >
>> >> >> >
>> >> >
>> >> >
>> >> >
>> >> > --
>> >> > Olsr-users mailing list
>> >> > (spam-protected) <mailto:(spam-protected)>
>> >> > https://lists.olsr.org/mailman/listinfo/olsr-users
>> >>
>> >>
>> >>
>> >>
>> >
>> > --
>> > Ferry Huberts
>> >
>> > --
>> > Olsr-users mailing list
>> > (spam-protected)
>> > https://lists.olsr.org/mailman/listinfo/olsr-users
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20150219/62a993ee/attachment.html>
More information about the Olsr-users
mailing list