[Olsr-users] Olsr_dot_draw plugin runs only once, why ?

Saverio Proto (spam-protected)
Wed Feb 18 21:53:36 CET 2015


If you do

 git log -- lib/dot_draw/

you can see that is very few commits touching that code.

we fixed a similar bug in 2010, look at commit:
34197cc4ac2d85d2b29ccc35c37faecbae5f3384

Abubakr Ali: are you sure you are running the latest version also of
the plugin ?
What Linux version are you in ? Is possible that you are running olsrd
of one version and outdated plugins of another version ?

Saverio

2015-02-18 18:10 GMT+01:00 Ferry Huberts <(spam-protected)>:
> Can you bisect the commit the broke it please?
>
>
> On 18/02/15 17:49, Abubakr Ali wrote:
>>
>> Hi Henning,
>>
>> Unfortunately, commenting the "if()" block didn't work. But thanks anyway.
>> I tried another solution of changing the condition at line 303 from "(
>> result <= 0 )"  to "( result < 0 )" based on this post
>>
>> <http://t27544.network-olsr-development.networktalks.info/dot-draw-plugin-closing-connection-t27544.html>.
>> But, again, it was another fail attempt.
>>
>> Now I am out of solutions...
>>
>> Regards,
>> Abubakr
>>
>>
>> On 17 February 2015 at 14:37, Henning Rogge <(spam-protected)
>> <mailto:(spam-protected)>> wrote:
>>
>>     Could you just go into the lib/dotdraw/src/olsrd_dot_draw.c file and
>>     remove the if() block from line 312 to line 319?
>>
>>     This might fix your issue.
>>
>>     Henning
>>
>>     On Tue, Feb 17, 2015 at 3:25 PM, Abubakr Ali <(spam-protected)
>>     <mailto:(spam-protected)>> wrote:
>>      > Well, I see the following output :
>>      >
>>      > Connected to 10.2.70.108...
>>      > Escape character is ']'.
>>      > disgraph topolopgy
>>      > {
>>      > "10.2.70.108" -> "10.2.70.104"[label="0.000", style=sold];
>>      > "10.2.70.108" [shape=box];
>>      > }
>>      >
>>      > Connection closed by foreign host.
>>      >
>>      > Thant is it !! .. no constant flow of data. Only this data. to
>>     see another
>>      > instance of the result, I have to run the command again.
>>      >
>>      > On 16 February 2015 at 07:16, Saverio Proto <(spam-protected)
>>     <mailto:(spam-protected)>> wrote:
>>      >>
>>      >> if you just do
>>      >>
>>      >> telnet ipaddress 2004
>>      >>
>>      >> do you see a constant flow of data from the dot draw plugin ?
>>      >>
>>      >> Saverio
>>      >>
>>      >> 2015-02-15 15:09 GMT+01:00 Abubakr Ali <(spam-protected)
>>     <mailto:(spam-protected)>>:
>>      >> > Thank you Saverio for the tip ...
>>      >> >
>>      >> > About the version I'm running OLSRd v:0.6.6.2. The OLSRd itself
>> is
>>      >> > running
>>      >> > fine and as expected. Therefore, I don't think it's a matter
>>     of OLSRd
>>      >> > configuration. However, the Osr Dot Draw plugin is the
>>     problem, and here
>>      >> > is
>>      >> > configuration part for it in the olsrd.conf file:
>>      >> >
>>      >> > LoadPlugin "olsrd_dot_draw.so.0.3"
>>      >> > {
>>      >> >        PlParam "accept" "10.2.70.108"
>>      >> >        PiParam "port"  "2004"
>>      >> > }
>>      >> >
>>      >> > Any suggestions !!
>>      >> >
>>      >> > Thank you,
>>      >> > Abubakr
>>      >> >
>>      >> >
>>      >> >
>>      >> >
>>      >> > On 14 February 2015 at 19:43, Saverio Proto
>>     <(spam-protected) <mailto:(spam-protected)>> wrote:
>>      >> >>
>>      >> >> What version of olsrd are you running ?
>>      >> >>
>>      >> >> When you ask a question always say which version are you
>>     running and
>>      >> >> attach relevant config files.
>>      >> >>
>>      >> >> Saverio
>>      >> >>
>>      >> >> 2015-02-13 17:04 GMT+01:00 Abubakr Ali
>>     <(spam-protected) <mailto:(spam-protected)>>:
>>      >> >> > Hi All,
>>      >> >> >
>>      >> >> > Whenever I run the "./olsr-topology-mesh-lab.pl
>>     <http://olsr-topology-mesh-lab.pl>" command, everything
>>
>>      >> >> > works
>>      >> >> > fine showing the network topology map. Then after a second
>>     or so, the
>>      >> >> > command exit with the message "connection closed" while the
>>     map still
>>      >> >> > there.
>>      >> >> > The map doesn't change at all. It is static, i.e.: one
>>     picture one
>>      >> >> > ImageMagick window. If I need to see the topology changes,
>>     then I
>>      >> >> > have
>>      >> >> > to
>>      >> >> > run the command again. But, again, "connection closed"
>>     message and
>>      >> >> > static
>>      >> >> > picture of a network topology.
>>      >> >> >
>>      >> >> > As far as the command's help-text states, it should run for
>>     ever
>>      >> >> > unless
>>      >> >> > I
>>      >> >> > stated the option "--once".
>>      >> >> >
>>      >> >> > does that mean it will and keep on producing images and
>>     showing it on
>>      >> >> > ImageMagic window ? or does it mean something else ?
>>      >> >> >
>>      >> >> > Is there is any solution or any way that keep the
>>     ImageMagick showing
>>      >> >> > images
>>      >> >> > every second or two showing my network topology. Even
>>     though if the
>>      >> >> > topology
>>      >> >> > does not change, I am still want ImageMagick to keep
>>     showing me a new
>>      >> >> > image
>>      >> >> > every 1 or 2 seconds .
>>      >> >> >
>>      >> >> >
>>      >> >> > Thank you
>>      >> >> > Abubakr
>>      >> >> >
>>      >> >> >
>>      >> >> > --
>>      >> >> > Olsr-users mailing list
>>      >> >> > (spam-protected) <mailto:(spam-protected)>
>>      >> >> > https://lists.olsr.org/mailman/listinfo/olsr-users
>>      >> >
>>      >> >
>>      >
>>      >
>>      >
>>      > --
>>      > Olsr-users mailing list
>>      > (spam-protected) <mailto:(spam-protected)>
>>      > https://lists.olsr.org/mailman/listinfo/olsr-users
>>
>>
>>
>>
>
> --
> Ferry Huberts
>
> --
> Olsr-users mailing list
> (spam-protected)
> https://lists.olsr.org/mailman/listinfo/olsr-users




More information about the Olsr-users mailing list