[Olsr-users] Olsr_dot_draw plugin runs only once, why ?

[Abubakr Ali]

Hi Henning,

Unfortunately, commenting the "if()" block didn't work. But thanks anyway.
I tried another solution of changing the condition at line 303 from "(
result <= 0 )"  to "( result < 0 )" based on this post
<http://t27544.network-olsr-development.networktalks.info/dot-draw-plugin-closing-connection-t27544.html>.
But, again, it was another fail attempt.

Now I am out of solutions...

Regards,
Abubakr


On 17 February 2015 at 14:37, Henning Rogge <(spam-protected)> wrote:

> Could you just go into the lib/dotdraw/src/olsrd_dot_draw.c file and
> remove the if() block from line 312 to line 319?
>
> This might fix your issue.
>
> Henning
>
> On Tue, Feb 17, 2015 at 3:25 PM, Abubakr Ali <(spam-protected)>
> wrote:
> > Well, I see the following output :
> >
> > Connected to 10.2.70.108...
> > Escape character is ']'.
> > disgraph topolopgy
> > {
> > "10.2.70.108" -> "10.2.70.104"[label="0.000", style=sold];
> > "10.2.70.108" [shape=box];
> > }
> >
> > Connection closed by foreign host.
> >
> > Thant is it !! .. no constant flow of data. Only this data. to see
> another
> > instance of the result, I have to run the command again.
> >
> > On 16 February 2015 at 07:16, Saverio Proto <(spam-protected)> wrote:
> >>
> >> if you just do
> >>
> >> telnet ipaddress 2004
> >>
> >> do you see a constant flow of data from the dot draw plugin ?
> >>
> >> Saverio
> >>
> >> 2015-02-15 15:09 GMT+01:00 Abubakr Ali <(spam-protected)>:
> >> > Thank you Saverio for the tip ...
> >> >
> >> > About the version I'm running OLSRd v:0.6.6.2. The OLSRd itself is
> >> > running
> >> > fine and as expected. Therefore, I don't think it's a matter of OLSRd
> >> > configuration. However, the Osr Dot Draw plugin is the problem, and
> here
> >> > is
> >> > configuration part for it in the olsrd.conf file:
> >> >
> >> > LoadPlugin "olsrd_dot_draw.so.0.3"
> >> > {
> >> >        PlParam "accept" "10.2.70.108"
> >> >        PiParam "port"  "2004"
> >> > }
> >> >
> >> > Any suggestions !!
> >> >
> >> > Thank you,
> >> > Abubakr
> >> >
> >> >
> >> >
> >> >
> >> > On 14 February 2015 at 19:43, Saverio Proto <(spam-protected)>
> wrote:
> >> >>
> >> >> What version of olsrd are you running ?
> >> >>
> >> >> When you ask a question always say which version are you running and
> >> >> attach relevant config files.
> >> >>
> >> >> Saverio
> >> >>
> >> >> 2015-02-13 17:04 GMT+01:00 Abubakr Ali <(spam-protected)>:
> >> >> > Hi All,
> >> >> >
> >> >> > Whenever I run the "./olsr-topology-mesh-lab.pl" command,
> everything
> >> >> > works
> >> >> > fine showing the network topology map. Then after a second or so,
> the
> >> >> > command exit with the message "connection closed" while the map
> still
> >> >> > there.
> >> >> > The map doesn't change at all. It is static, i.e.: one picture one
> >> >> > ImageMagick window. If I need to see the topology changes, then I
> >> >> > have
> >> >> > to
> >> >> > run the command again. But, again, "connection closed" message and
> >> >> > static
> >> >> > picture of a network topology.
> >> >> >
> >> >> > As far as the command's help-text states, it should run for ever
> >> >> > unless
> >> >> > I
> >> >> > stated the option "--once".
> >> >> >
> >> >> > does that mean it will and keep on producing images and showing it
> on
> >> >> > ImageMagic window ? or does it mean something else ?
> >> >> >
> >> >> > Is there is any solution or any way that keep the ImageMagick
> showing
> >> >> > images
> >> >> > every second or two showing my network topology. Even though if the
> >> >> > topology
> >> >> > does not change, I am still want ImageMagick to keep showing me a
> new
> >> >> > image
> >> >> > every 1 or 2 seconds .
> >> >> >
> >> >> >
> >> >> > Thank you
> >> >> > Abubakr
> >> >> >
> >> >> >
> >> >> > --
> >> >> > Olsr-users mailing list
> >> >> > (spam-protected)
> >> >> > https://lists.olsr.org/mailman/listinfo/olsr-users
> >> >
> >> >
> >
> >
> >
> > --
> > Olsr-users mailing list
> > (spam-protected)
> > https://lists.olsr.org/mailman/listinfo/olsr-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20150218/2c63a290/attachment.html>