[Olsr-users] Mesh on Gondola

[Hesameddin Alizadeh]

I thought we are here to help each other to improve the problems and use other experiences.
I have been trying to setup the best setting on each clients and customize them. I would be really thankful if you are going to correct my failure which is depend on to your experiences.
Actually two days ago I simulated OLSRv1 on the Mesh with 4 clients on reality with default setting which did not work properly. Because of low convergence. 


-----Original Message-----
From: Henning Rogge [mailto:(spam-protected)] 
Sent: Donnerstag, 17. Dezember 2015 10:05
To: Hesameddin Alizadeh <(spam-protected)>
Cc: (spam-protected)
Subject: Re: [Olsr-users] Mesh on Gondola

On Thu, Dec 17, 2015 at 8:21 AM, Hesameddin Alizadeh <(spam-protected)> wrote:
> I changed the TCInterval values because I am going to decrease a bit the overhead but the other values are still in default.
> I am not using different Interface which MID is not important and do 
> not set any HOST or NETWORK to the HNA.( Maybe is better to comment both of them?!) Actually the topology are changing every 30 seconds. Do you think that does not need to change on setting ?

I don't care what you set to Hello/TC if it works for you, but I know what happens with configurations like this in the long run... they get copied and copied and copied.

So PLEASE do not set values you don't need, just leave them on default.

Henning