[Olsr-users] Mesh on Gondola

[Hesameddin Alizadeh]

I assigned new value for TC Interval which is :

HelloInterval       2.0
HelloValidityTime   20.0
TcInterval          32.0
TcValidityTime      300.0
MidInterval         5.0
MidValidityTime     300.0
HnaInterval         5.0
HnaValidityTime     300.0

But client has been sending this packet in different timing. (between  24 seconds - 31 seconds ).

-----Original Message-----
From: Henning Rogge [mailto:(spam-protected)] 
Sent: Mittwoch, 16. Dezember 2015 10:55
To: Hesameddin Alizadeh <(spam-protected)>
Cc: (spam-protected)
Subject: Re: [Olsr-users] Mesh on Gondola

Have you tried to send one of the commands mentions in the README for the txtinfo plugin?

Henning

On Wed, Dec 16, 2015 at 10:53 AM, Hesameddin Alizadeh <(spam-protected)> wrote:
> When I am using " nc localhost 2006 " to get output, need to use twice "Enter". Is it normal reaction from Plugins ?
>
> -----Original Message-----
> From: Olsr-users [mailto:(spam-protected)] On Behalf 
> Of Hesameddin Alizadeh
> Sent: Dienstag, 15. Dezember 2015 17:11
> To: Henning Rogge <(spam-protected)>
> Cc: (spam-protected)
> Subject: Re: [Olsr-users] Mesh on Gondola
>
> Thank you.
> It`s working like a charm.
>
> -----Original Message-----
> From: Henning Rogge [mailto:(spam-protected)]
> Sent: Dienstag, 15. Dezember 2015 17:04
> To: Hesameddin Alizadeh <(spam-protected)>
> Cc: (spam-protected)
> Subject: Re: [Olsr-users] Mesh on Gondola
>
> On Tue, Dec 15, 2015 at 5:01 PM, Hesameddin Alizadeh <(spam-protected)> wrote:
>> May I ask you how do I get an output from CLI about Route and Topology ?
>
> You use the "txtinfo" plugin...
>
> it opens a telnet port where you can get all kinds of information.
>
> Henning
> --
> Olsr-users mailing list
> (spam-protected)
> https://lists.olsr.org/mailman/listinfo/olsr-users