[Olsr-users] olsrd.conf

[Armansah Hs]

Thanks for the reply.
My Cubieboard is working perfectly with the newer version of OLSRd.

To be honest, I do not quite understand about the OLSR configuration.
therefore, I will probably ask a lot here in the future.

Thank you for helping


On Fri, Mar 14, 2014 at 4:27 AM, Armansah Hs <(spam-protected)> wrote:

> The newer version I tried is olsrd-0.6.6.1
> Installed from the source .tar.gz
>
> problem occurs in the sudo make all step (solved)
>
> ...Installation success
>
> when start OLSRd
> another problem occurs
>
> ???????????????????????????
> ???????????????????????????
> ???????????????????????????
> File name too long
>
> but I guess that this is not related to olsrd.conf but related to the
> device itself
> OLSRd 0.6.6.1 on Laptop works perfectly
>
>
> On Thu, Mar 13, 2014 at 5:44 AM, Henning Rogge <(spam-protected)> wrote:
>
>> Feel free to ask, the olsrd.conf is a place of a lot of confusion
>> because of LOTs of strange advise that is floating around the web.
>>
>> The defaults should be reasonable for most people so my usual advise
>> is to keep it as minimal as possible.
>>
>> Oh, you also forgot to send your reply to the list, maybe you want to
>> do so so Ferry knows that the new version resolved your problem! :)
>>
>> Henning Rogge
>>
>> On Wed, Mar 12, 2014 at 6:07 PM, Armansah Hs <(spam-protected)>
>> wrote:
>> > Thanks for the reply.
>> > My Cubieboard is working perfectly with the newer version of OLSRd.
>> >
>> > To be honest, I do not quite understand about the OLSR configuration.
>> > therefore, I will probably ask a lot here in the future.
>> >
>> > Thank you for helping
>> >
>> > Armansah Hs
>> >
>> >
>> > On Tue, Mar 11, 2014 at 7:24 PM, Henning Rogge <(spam-protected)>
>> wrote:
>> >>
>> >> I would suggest throwing out all configuration option you don't really
>> >> need. Try with a minimal configuration file:
>> >>
>> >> Interface "wlan0"
>> >> {
>> >> }
>> >>
>> >> LoadPlugin "olsrd_txtinfo.so.0.1"
>> >> {
>> >> PlParam "port" "8080"
>> >> PlParam "host" "127.0.0.1"
>> >> }
>> >>
>> >> Also, moving to the latest stable olsrd version might be a good idea.
>> >>
>> >> Henning Rogge
>> >>
>> >> On Sat, Mar 8, 2014 at 6:52 PM, Armansah Hs <(spam-protected)>
>> wrote:
>> >> > I have olsrd 0.6.3 installed on cubieboard (linaro ubuntu 12.10) and
>> >> > laptop
>> >> > (ubuntu 13.10).
>> >> > when olsrd started, it's ok on laptop but on cubieboard olsrd will
>> >> > continuosly print "sendto(v4): Invalid Argument".
>> >> >
>> >> > here my configuration /etc/network/interfaces
>> >> >
>> >> > auto wlan0
>> >> > allow-hot plug wlan0
>> >> > iface wlan0 inet static
>> >> > address 192.168.120.1
>> >> > netmask 255.255.255.0
>> >> > wireless-mode ad-hoc
>> >> > wireless-channel 10
>> >> > wireless-essid MESH
>> >> >
>> >> > etc/olsrd/olsrd.conf
>> >> >
>> >> > DebugLevel      2
>> >> > Interface          "wlan0"
>> >> > {
>> >> > HelloInterval 1.0
>> >> > HelloValidityTime 600.0
>> >> > TcInterval 0.5
>> >> > TcValidityTime 300.0
>> >> > MidInterval 10.0
>> >> > MidValidityTime 300.0
>> >> > HnaInterval 10.0
>> >> > HnaValidityTime 300.0
>> >> > }
>> >> > LinkQualityFishEye 1
>> >> > IpVersion 4
>> >> > ClearScreen     yes
>> >> > AllowNoInt        yes
>> >> > willingness        7
>> >> >
>> >> > IpcConnect
>> >> > {
>> >> > MaxConnetion    0
>> >> > Host                  127.0.0.1
>> >> > }
>> >> >
>> >> > UseHysteresis     no
>> >> > Pollrate              0.1
>> >> > TcRedundancy    2
>> >> > MprCoverage       5
>> >> > LoadPlugin "olsrd_txtinfo.so.0.1"
>> >> > {
>> >> > PlParam "port" "8080"
>> >> > PlParam "host" "127.0.0.1"
>> >> > }
>> >> >
>> >> >
>> >> > ---------------------------
>> >> > Am I miss something on configuration file ?
>> >> >
>> >> > I'm want to use OLSRd for sending file (document), stream video (I'm
>> >> > using
>> >> > VLC)
>> >> >
>> >> > Thanks before and I,m sorry for bad english :)
>> >> >
>> >> >
>> >> > --
>> >> > Olsr-users mailing list
>> >> > (spam-protected)
>> >> > https://lists.olsr.org/mailman/listinfo/olsr-users
>> >
>> >
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20140314/e1cee90c/attachment.html>