[Olsr-users] Configuration for olsrd.conf

Thu Mar 6 12:02:57 CET 2014

hello, I'm very happy my small test network with 3 routers is working
perfectly, I experienced some problems because I was configuring the nodes
of the Gatwey static way, that's when I realized that olsr already does
this, and best left on account him, also activated this LinkQualityLevel option
value '2 'not knowing default value which it receives, so far everything
working lovely, my next option is to install a captive port, I am already
researching and wifidog cooval-chilli, thank you very much for this
wonderful work, and by that active list support, thanks again.

Att
Anderson Junior

2014-03-06 4:02 GMT-04:00 Henning Rogge <(spam-protected)>:

> We only have a small CONFINE test network at our institute, but most
> community mesh networks run hundreds of nodes with the current OpenWRT
> software.
>
> Henning
>
> On Sun, Mar 2, 2014 at 1:48 PM, ANDERSON JUNIOR GADO DA SILVA
> <(spam-protected)> wrote:
> > hi, I understand perfectly, this time I'm using 12:09, a version I
> compiled
> > via buildroot is working, I have asked questions on the official list but
> > got no response when I gave the command for the terminal / etc / init.d /
> > firewall start he appeared several errors and a message that the kernel
> may
> > need to be updated, so I arrived at that conclusion with 3:10 kernel is
> > running, already with 3.8 did not work, I kept the same settings.
> >
> > ps: how many routers have in your network today?
> >
> > Att
> > Anderson Junior
> >
> >
> > 2014-03-02 3:11 GMT-04:00 Henning Rogge <(spam-protected)>:
> >
> >> Hi,
> >>
> >> we have running a lot of 12.09 openwrt devices at our institute and
> >> never had trouble with iptables... I would NOT suggest to go back to a
> >> version more than 4 years old.
> >>
> >> Maybe you should ask about the problem on an OpenWRT mailing list.
> >>
> >> Henning Rogge
> >>
> >> On Sun, Mar 2, 2014 at 4:16 AM, ANDERSON JUNIOR GADO DA SILVA
> >> <(spam-protected)> wrote:
> >> > hello, Chris W. and Henning Rogge, after several attempts I found
> where
> >> > the
> >> > problem was, the 3.8.x kernel openwrt 12.x (this package
> >> >
> >> >
> http://downloads.openwrt.org/attitude_adjustment/12.09/ar71xx/generic/openwrt-ar71xx-generic-tl-wr1043nd-v1-squashfs-factory.bin
> )
> >> > is in serious trouble in the iptables modules, including the nat and
> >> > filter,
> >> > then actually would never work, I downloaded the version of svn trunk
> >> > compiled a new binary and it worked, just not tested it is working on
> >> > other
> >> > routers, but already took a big step today in the morning back to work
> >> > on
> >> > it, I'm thinking instead of version 12.x back to 8:09, do you have any
> >> > suggestions?
> >> >
> >> > thanks for calm that had friends with me.
> >> >
> >> > Att
> >> > Anderson Junior
> >> >
> >> >
> >> > 2014-03-01 14:42 GMT-04:00 ANDERSON JUNIOR GADO DA SILVA
> >> > <(spam-protected)>:
> >> >
> >> >> ok, I changed to the 172.11.0.1/24 lan, still did not result, do not
> >> >> know
> >> >> if pass something in your message, do not speak English, to using
> >> >> google
> >> >> translator ...
> >> >>
> >> >> Att
> >> >> Anderson Junior
> >> >>
> >> >>
> >> >> 2014-03-01 14:11 GMT-04:00 Chris W. <(spam-protected)>:
> >> >>
> >> >>>
> >> >>>> ok thanks for the feedback, let it
> >> >>>> Concerning the mask 255.255.0.0 is a TA in that class and so far I
> >> >>>> have
> >> >>>> not changed, but soon it'll network.
> >> >>>
> >> >>> It is overlapping the LAN's 192.168.1.x ...
> >> >>>
> >> >>>
> >> >>>>
> >> >>>> regarding vlan, I did not change this pattern that comes with the
> >> >>>> openwrt for this router model but suggest me if I change something,
> >> >>>> I'll
> >> >>>> comment on that vlan to see if it makes a difference.
> >> >>>
> >> >>> Vlan is right I guess, now when looking at it again ;)
> >> >>>
> >> >>>
> >> >>>>
> >> >>>> when the wlan router the other is that the moment they were off,
> but
> >> >>>> now
> >> >>>> I'm sending a new output from echo command '/ all' | nc localhost
> >> >>>> 2006
> >> >>>> here is:
> >> >>>>
> >> >>>> echo '/all' | nc localhost 2006
> >> >>>
> >> >>>
> >> >>> [...]
> >> >>>
> >> >>> Meshing well, only the routers' LANs need to be announced via HNA
> >> >>> entry
> >> >>> to bring the connected machines into play.
> >> >>>
> >> >>>>
> >> >>>> Table: HNA
> >> >>>> Destination     Gateway
> >> >>>> 0.0.0.0/0 <http://0.0.0.0/0>       10.5.0.1
> >> >>>>
> >> >>>>
> >> >>>> Att
> >> >>>> Anderson Junior
> >> >>>>
> >> >>>>
> >> >>> [...]
> >> >>>
> >> >>> greetings,
> >> >>> C
> >> >>
> >> >>
> >> >
> >> >
> >> >
> >> > --
> >> >
> >> >
> >
> >
> >
> >
> > --
> >
> >
>

--
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20140306/cd88317d/attachment.html>