[Olsr-users] Configuration for olsrd.conf

[Henning Rogge]

Hi,

so you now have connectivity between all nodes, even if they are not
all in direct range (OLSR should forward the traffic hop by hip)?

Henning

On Thu, Feb 27, 2014 at 5:26 PM, ANDERSON JUNIOR GADO DA SILVA
<(spam-protected)> wrote:
> hello, thanks for the help so far, the 3 devices are talking to each other,
> were with the ips so, 10.5.0.1, 10.5.0.2 and 10.5.0.3, but still no internet
> connection, I must choose one of openwrt and configure the wan, still do not
> see a way out in order to use pppoe authentication or captive (hotspot)
> portal.
>
> Att
> Anderson Junior
>
>
> 2014-02-27 11:19 GMT-04:00 Chris W. <(spam-protected)>:
>
>> Hello,
>>
>> an ip-bridge is not too useful with olsr,
>> the router's lan might be in a separate subnet which gets announced via
>> olsrd.conf's HNA entry.
>> In this case all radios are in the 192.168.2.x subnet and
>> all lans are in 192.168.x.0/24 so the routing remains simple.
>>
>>
>> /etc/config/network:
>>
>> config interface 'lan'
>>         option ifname 'eth1'
>>         option proto 'static'
>>         option ipaddr '192.168.47.1'
>>         option netmask '255.255.255.0'
>>
>> config interface 'wlan0'
>>         option proto 'static'
>>         option ipaddr '192.168.2.47'
>>         option netmask '255.255.255.0'
>>
>> /etc/config/wireless:
>>
>> config wifi-iface
>>         option device 'radio0'
>>         option mode 'adhoc'
>>         option ssid 'somename'
>>         option bssid '00:10:20:30:40:70'
>>         option network 'wlan0'
>>
>> Good luck :)
>>
>> Chris
>>
>>
>>
>> On 02/27/2014 01:16 PM, ANDERSON JUNIOR GADO DA SILVA wrote:
>>>
>>> Hello, researching more about the ad-hoc mode, it does not support so I
>>> need to configure a bridge ip to it, I have done that and now I'm
>>> conceguindo access the radio and also dribbling it, knowing now that he
>>> does not accept bridge'm looking for an outlet for the mac computer that
>>> will make the connection arrives on the server because the
>>> authentication is via PPPoE, I'm still very confused but already
>>> beginning to understand, you have any suggestions for the network
>>> topology?
>>>
>>> Att
>>> Anderson Junior
>>>
>>>
>>> 2014-02-27 4:07 GMT-04:00 Henning Rogge
>>> <(spam-protected)
>>> <mailto:(spam-protected)>>:
>>>
>>>
>>>     On 02/26/2014 08:58 PM, ANDERSON JUNIOR GADO DA SILVA wrote:
>>>      > Good afternoon, I was in doubt if I should start a new
>>>     conversation so
>>>      > I'm posting here again.
>>>      >
>>>      > without making any changes to the file connected the router and
>>>      > connected directly to link a computer in wireless ad-hoc
>>>     wireless, but
>>>      > when I'm by wireless concigo not ping even access the router,
>>>     only when
>>>      > connected directly by cable, any hint is well Welcome.
>>>
>>>     Even before you start the routing daemon you should be able to ping
>>> your
>>>     direct neighbors. If this doesn't work your wifi/interface
>>> configuration
>>>     is bugged.
>>>
>>>     So I would advise to test the connectivity of your network without
>>> olsrd
>>>     first.
>>>
>>>     See
>>> http://www.olsr.org/mediawiki/index.php/First_Mesh_Troubleshooting
>>>
>>>     Henning Rogge
>>>
>>>
>>>     --
>>>     Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
>>>     Kommunikation, Informationsverarbeitung und Ergonomie FKIE
>>>     Kommunikationssysteme (KOM)
>>>     Fraunhofer Straße 20, 53343 Wachtberg, Germany
>>>     Telefon +49 228 9435-961 <tel:%2B49%20228%209435-961>,   Fax +49 228
>>>     9435 685 <tel:%2B49%20228%209435%20685>
>>>     mailto:(spam-protected)
>>>
>>>     <mailto:(spam-protected)>
>>> http://www.fkie.fraunhofer.de
>>>
>>>
>>>     --
>>>     Olsr-users mailing list
>>>     (spam-protected) <mailto:(spam-protected)>
>>>     https://lists.olsr.org/mailman/listinfo/olsr-users
>>>
>>>
>>>
>>>
>>>
>>>
>>
>> --
>> Olsr-users mailing list
>> (spam-protected)
>> https://lists.olsr.org/mailman/listinfo/olsr-users
>
>
>
> --
> Olsr-users mailing list
> (spam-protected)
> https://lists.olsr.org/mailman/listinfo/olsr-users