[Olsr-users] OLSR between different networks

[Breno Silva]

Thanks Henning,

I will be able to test it soon. Then i can give a feedback.

Breno


On Thu, May 9, 2013 at 9:32 AM, Henning Rogge <(spam-protected)> wrote:

> As long as you do not reuse the same address, OLSR will work.
>
> It will set up a host-route (a /32 route) to each of the mesh nodes,
> which means the different networks do not really matter for OLSR.
>
> Henning Rogge
>
> On Thu, May 9, 2013 at 2:21 PM, Breno Silva <(spam-protected)> wrote:
> > Hello,
> >
> > I would like to setup OLSR between some computers, however each computer
> is
> > connected in a Radio (ethernet interface) and they transmit data to each
> > other using a wireless radio interface.
> >
> > The radio is Half-Duplex and i already com send IP/UDP data to each
> other.
> > This is a common flow to send/recv data
> >
> > COMPUTER1 (10.1.1.2)  <-> (10.1.1.1) RADIO1 ( 192.168.0.1)
> > <------------------>              (192.168.0.2) RADIO2 (10.1.2.1) <->
> > COMPUTER2 (10.1.2.2).
> >
> > So each computer is a member of different network. I would like to know
> if
> > the OLSRD will work with this environment.
> >
> > Thanks
> >
> > Breno
> >
> > --
> > Olsr-users mailing list
> > (spam-protected)
> > https://lists.olsr.org/mailman/listinfo/olsr-users
>
>
>
> --
> We began as wanderers, and we are wanderers still. We have lingured
> long enough on the shores of the cosmic ocean. We are ready at last to
> set sail for the stars - Carl Sagan
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20130509/f859f0b9/attachment.html>