[Olsr-users] How do I make two devices running olsrd , connect

[Nkosikhona Dlamini]

Hi All ,

I am a newBie on olsrd . I have installed it to my Pc and cubieboard.

this a what is displayed when i run (on both PC nd cubienboard)  # olsrd
-nofork
 (spam-protected):/home/santiware# sudo olsrd -nofork

 *** olsr.org -  0.6.3-git_-hash_cfd7c48ab5a78db3e70cfdece616addb  - ***
 Build date: 2013-04-06 06:14:10 on batsu
 http://www.olsr.org

Parsing file: "/etc/olsrd/olsrd.conf"
Debug level: 0
setting ifs_in_curr_cfg = 0
    Autodetect changes: YES
    IPv4 broadcast: 255.255.255.255
    HELLO interval: 6.00
    HELLO validity: 600.00
    TC interval: 0.50
    TC validity: 300.00
    MID interval: 10.00
    MID validity: 300.00
    HNA interval: 10.00
    HNA validity: 300.00
Link quality fish eye 1
IpVersion: 4
Clear screen enabled
Noint set to 1
Willingness: 7
    IPC host: 127.0.0.1
    IPC net: 192.168.1.0/255.255.255.0
Hysteresis disabled
Link quality level 2
Pollrate 0.10
TC redundancy 2
MPR coverage 5
    IPv4 broadcast/multicast : 255.255.255.255
    Mode           : mesh
    IPv6 multicast           : ::
    HELLO emission/validity  : 6.00 (d)/600.00 (d)
    TC emission/validity     : 0.50 (d)/300.00 (d)
    MID emission/validity    : 10.00 (d)/300.00 (d)
    HNA emission/validity    : 10.00 (d)/300.00 (d)
    Autodetect changes       : yes
    IPv4 broadcast/multicast : 255.255.255.255
    Mode           : mesh
    IPv6 multicast           : ::
    HELLO emission/validity  : 6.00 (d)/600.00 (d)
    TC emission/validity     : 0.50 (d)/300.00 (d)
    MID emission/validity    : 10.00 (d)/300.00 (d)
    HNA emission/validity    : 10.00 (d)/300.00 (d)
    Autodetect changes       : yes
-- ALL PLUGINS LOADED! --

now I  am requesting for advise on how to make a connection between my Pc
an my Cubieboard

Thanking you guyz in advance for you help .
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20130603/d5acabb4/attachment.html>