[Olsr-users] IPv6 failure

[Russell Senior]

Since OpenWrt trunk switched to olsrd-0.6.5.1 a week or so ago, I've
been unable to get our previously working (with v0.6.4) configuration
for ipv6 to fly:

  # cat /etc/olsr6d.conf 
  IpVersion 6
  
  LinkQualityFishEye 0
  
  Hna6
  {
          2001:470:e962:1201::    64
  }
  
  Interface "br-pub" "ptp"
  {
  }

Starting like this, I get the following output:

  # olsrd -d 8 -f /etc/olsr6d.conf -nofork -pidfile /var/run/olsr6d.pid

   *** olsr.org -  0.6.5.1-git_1f9136f-hash_d4338c5eb1a4907c4bc59bb0d24ad97a  - ***
   Build date: 2013-02-23 00:27:24 on iris
   http://www.olsr.org

  Parsing file: "/etc/olsr6d.conf"
  IpVersion: 6
  Link quality fish eye 0
  HNA IPv6 entry: 2001:470:e962:1201::/64
  setting ifs_in_curr_cfg = 0
          IPv4 broadcast/multicast : AUTO
          Mode           : mesh
          IPv6 multicast           : ::
          HELLO emission/validity  : 0.00/0.00
          TC emission/validity     : 0.00/0.00
          MID emission/validity    : 0.00/0.00
          HNA emission/validity    : 0.00/0.00
          Autodetect changes       : no
          IPv4 broadcast/multicast : AUTO
          Mode           : mesh
          IPv6 multicast           : ::
          HELLO emission/validity  : 0.00/0.00
          TC emission/validity     : 0.00/0.00
          MID emission/validity    : 0.00/0.00
          HNA emission/validity    : 0.00/0.00
          Autodetect changes       : no
   *** olsrd configuration ***
  Debug Level      : 8
  IpVersion        : 6
  No interfaces    : ALLOWED
  TOS              : 0xc0
  OlsrPort          : 698
  RtTable          : 254
  RtTableDefault   : 254
  RtTableTunnel    : 254
  Willingness      : 3
  IPC connections  : 0
  Pollrate         : 0.05
  NIC ChangPollrate: 2.50
  TC redundancy    : 2
  MPR coverage     : 7
  LQ level         : 2
  LQ fish eye      : 0
  LQ aging factor  : 0.050000
  LQ algorithm name: default
  NAT threshold    : 1.000000
  Clear screen     : yes
  Use niit         : yes
  Smart Gateway    : no
  SmGw. Allow NAT  : yes
  SmGw. period     : 10000
  SmGw. stablecount: 6
  SmGw. threshold  : 0%
  Smart Gw. Uplink : both
  SmGw. Uplink NAT : yes
  Smart Gw. speed  : 128 kbit/s up, 1024 kbit/s down
  # Smart Gw. prefix : ::/0
   InterfaceDefaults: 
          IPv4 broadcast/multicast : AUTO
          Mode           : mesh
          IPv6 multicast           : ff02::6d
          HELLO emission/validity  : 2.00/20.00
          TC emission/validity     : 5.00/300.00
          MID emission/validity    : 5.00/300.00
          HNA emission/validity    : 5.00/300.00
          Autodetect changes       : yes
   dev: "br-pub"
          IPv4 broadcast/multicast : AUTO (d)
          Mode           : mesh (d)
          IPv6 multicast           : ff02::6d (d)
          HELLO emission/validity  : 2.00 (d)/20.00 (d)
          TC emission/validity     : 5.00 (d)/300.00 (d)
          MID emission/validity    : 5.00 (d)/300.00 (d)
          HNA emission/validity    : 5.00 (d)/300.00 (d)
          Autodetect changes       : yes (d)
   dev: "ptp"
          IPv4 broadcast/multicast : AUTO (d)
          Mode           : mesh (d)
          IPv6 multicast           : ff02::6d (d)
          HELLO emission/validity  : 2.00 (d)/20.00 (d)
          TC emission/validity     : 5.00 (d)/300.00 (d)
          MID emission/validity    : 5.00 (d)/300.00 (d)
          HNA emission/validity    : 5.00 (d)/300.00 (d)
          Autodetect changes       : yes (d)
  Not using hysteresis
  HNA6 entries:
          2001:470:e962:1201::/64
  No interfaces detected! This might be intentional, but it also might mean that your configuration is fubar.
  I will continue after 5 seconds...

Clues?


-- 
Russell Senior, President
(spam-protected)