[Olsr-users] FW: OLSRd nodes not talking to each other

[John Schultz]

Actually, the GW will only have 3 interfaces, the other nodes will only use
eth0 for POE (once this is configured)

-----Original Message-----
From: (spam-protected) [mailto:(spam-protected)] On Behalf
Of Henning Rogge
Sent: Monday, September 24, 2012 1:25 AM
To: (spam-protected)
Subject: Re: [Olsr-users] OLSRd nodes not talking to each other

On 09/24/2012 09:22 AM, Vigneswaran R wrote:
>> They have the same network address and netmask (all three have 
>> 10.0.0.0/8). This cannot work, the routing code will not know where 
>> to send packets.
>>
>> You have to give each interface its own unique network range.
>> (e.g. 10.1.0.0/16, 10.2.0.0/16, 10.3.0.0/16)
>
> Sorry to interrupt your discussion. Due to node movements, if two 
> nodes/NICs with different subnet settings become part of a link, will 
> olsr establish route?
>
> Because when I tried this earlier (in a wired network), no route was 
> established. Am I missing something?

If I understand the mail from John right, we are talking about three network
cards on the same node.

Henning Rogge

--
Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für Kommunikation,
Informationsverarbeitung und Ergonomie FKIE Kommunikationssysteme (KOM)
Fraunhofer Straße 20, 53343 Wachtberg, Germany
Telefon +49 228 9435-961,   Fax +49 228 9435 685
mailto:(spam-protected) http://www.fkie.fraunhofer.de

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 6169 bytes
Desc: not available
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20120924/d552d26b/attachment.bin>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Untitled attachment 00004.txt
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20120924/d552d26b/attachment.txt>