[Olsr-users] default route is where

[Henning Rogge]

Routing tables and rules can become pretty crazy in special scenarios. *G*

Henning

On Wed, May 2, 2012 at 9:15 PM, Érico Porto <(spam-protected)> wrote:
> Works like a charm, just did RtTable 3, RtTableDefault 3 and "Tunnel 3. I
> was just explaining why I didn't saw this configuration before.
>
> Érico V. Porto
>
>
>
> On Wed, May 2, 2012 at 4:06 PM, Henning Rogge <(spam-protected)> wrote:
>>
>> You don't need the whole "full default", you can just copy the single
>> line you need. See it as a documentation/example file.
>>
>> Henning
>>
>> On Wed, May 2, 2012 at 9:00 PM, Érico Porto <(spam-protected)>
>> wrote:
>> > Right, got it. Wasn't using default.full but instead another conf file -
>> > based on another default... Will use those one. I'm on 0.6.2. Thanks
>> > Henning!
>> >
>> > Érico V. Porto
>> >
>> >
>> >
>> > On Wed, May 2, 2012 at 2:51 PM, Henning Rogge <(spam-protected)>
>> > wrote:
>> >>
>> >> If you use a recent OLSRd (0.6.0 or better), have a look at
>> >> /files/olsrd.conf.default.full
>> >>
>> >> It should contain all options with explanations, including the one you
>> >> look for:
>> >>
>> >> # Specifies the routing Table olsr uses
>> >> # RtTable is for host routes, RtTableDefault for the route to the
>> >> default
>> >> # internet gateway (2 in case of IPv6+NIIT) and RtTableTunnel is for
>> >> # routes to the ipip tunnels, valid values are 1 to 254
>> >> # There is a special parameter "auto" (choose default below)
>> >> # (with smartgw: default is 254/223/224)
>> >> # (without smartgw: default is 254/254/254, linux main table)
>> >>
>> >> # RtTable auto
>> >> # RtTableDefault auto
>> >> # RtTableTunnel auto
>> >>
>> >> On Wed, May 2, 2012 at 7:45 PM, Érico Porto <(spam-protected)>
>> >> wrote:
>> >> > Hello people,
>> >> >
>> >> > Some time ago I had some help here from Marcus and Teco, about the
>> >> > default
>> >> > gateway for my node and the smart-gateway feature. At the time the
>> >> > answers I
>> >> > got here were suffice, so I didn't ask anything further and the
>> >> > currently
>> >> > documentation was enough.
>> >> >
>> >> > I've read in the DD-WRT docs, and is listed there that the default ..
>> >> > uhm..
>> >> > default (?) route is maintained  in the table 223, and the smart
>> >> > gateway
>> >> > route is listed in table 224. Is it possible to change those table
>> >> > numbers?
>> >> > And a default route from OLSR will always be in one of those tables,
>> >> > right?
>> >> >
>> >> > Just to be sure.
>> >> >
>> >> > Thanks.
>> >> >
>> >> > Érico V. Porto
>> >> >
>> >> > --
>> >> > Olsr-users mailing list
>> >> > (spam-protected)
>> >> > https://lists.olsr.org/mailman/listinfo/olsr-users
>> >>
>> >>
>> >>
>> >> --
>> >> Steven Hawkings about cosmic inflation: "An increase of billions of
>> >> billions of percent in a tiny fraction of a second. Of course, that
>> >> was before the present government."
>> >
>> >
>>
>>
>>
>> --
>> Steven Hawkings about cosmic inflation: "An increase of billions of
>> billions of percent in a tiny fraction of a second. Of course, that
>> was before the present government."
>
>



-- 
Steven Hawkings about cosmic inflation: "An increase of billions of
billions of percent in a tiny fraction of a second. Of course, that
was before the present government."