[Olsr-users] default gateway shown in hna isn't in route table

[Markus Kittenberger]

the default table is not deprecated!

just the old route utiliy (which can only read/display the default table)

furthermore are u shure u need the smartgateway?
do you have multiple uplinks, which are NATing?
(else smartgateway only offers overhead, maybe mtu problems, and definitely
no benefit,.)

On Fri, Feb 17, 2012 at 4:47 PM, Érico Porto <(spam-protected)>wrote:

> Uhm, ok, reading it now. For the moment I just left the SmartGW feature
> off, just to read the default gateway in the deprecated table.
>
> Thanks Teco!
>
> Érico V. Porto
>
>
>
> On Fri, Feb 17, 2012 at 12:33 PM, Teco Boot <(spam-protected)> wrote:
>
>> Please use ip route, if you use iproute2. You do.
>> route should be deprecated. It can use it for main table only.
>> You could read a manual.
>>
>> Teco
>>
>> Op 17 feb. 2012, om 15:13 heeft Érico Porto het volgende geschreven:
>>
>> > On Fri, Feb 17, 2012 at 5:04 AM, Markus Kittenberger <
>> (spam-protected)> wrote:
>> >
>> >
>> > On Fri, Feb 17, 2012 at 7:55 AM, Teco Boot <(spam-protected)> wrote:
>> > PLEASE DON"T SHOUT ...
>> >
>> > So you have all functions you want, but want to know why?
>> > If you use SmartGW, the default is not in the main table.
>> > same apllies if u use RtTable or RtTableDefault.
>> > Check with ip route show table all
>> >
>> > Teco
>> >
>> > Op 17 feb. 2012, om 02:38 heeft Érico Porto het volgende geschreven:
>> >
>> >> I'm simply uncommenting the line after "# hna4 - internet gateway:"
>> and changing from #0.0.0.0 0.0.0.0 to 0.0.0.0 0.0.0.0. Do I have to do
>> anything beside this on any of the nodes to enable one of them as internet
>> gateway?
>> >>
>> >> Érico V. Porto
>> >>
>> >>
>> >> On Thu, Feb 16, 2012 at 5:43 PM, Érico Porto <(spam-protected)>
>> wrote:
>> >> Hello
>> >>
>> >> I'm using olsrd 0.6.2, and I'm having a strange bug here. I have two
>> nodes, one is connected to the internet, through cable, and the other
>> isn't. These two nodes wireless interfaces are connected, and one of them
>> is configured as internet gateway. If I type route -n in the internet
>> gateway node, I can see my default gateway is my ethernet interface.
>> >>
>> >> Ok, no I'm at the other node. I type route -n and I have no default
>> gateway set. I type telnet localhost 2006, and get all the information I
>> expect, including the first node listed as default in the hna section. Why
>> I see no default gateway set when typing route -n?
>> >>
>> >> The real problem is because I AM ABLE TO ACCESS THE INTERNET FROM THIS
>> NODE. I have no dns, but it's ok, I don't want it, but any ip I type in
>> browser on a computer connected to this node get's me to the right webpage!
>> >>
>> >> Regards
>> >>
>> >> Érico V. Porto
>> >>
>> >> --
>> >> Olsr-users mailing list
>> >> (spam-protected)
>> >> https://lists.olsr.org/mailman/listinfo/olsr-users
>> >
>> >
>> > --
>> > Olsr-users mailing list
>> > (spam-protected)
>> > https://lists.olsr.org/mailman/listinfo/olsr-users
>> >
>> >
>> > Uhm, thanks, found my default gateway using ip route show table all.
>> @Teco You've said that showing in the other routing table is not default,
>> but is there an option so I can see it there also? (using route -n)
>> >
>> > But yeah, the whole question was about how that was possible really.
>> >
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20120217/ca66902a/attachment.html>