[Olsr-users] default gateway shown in hna isn't in route table

[Érico Porto]

On Fri, Feb 17, 2012 at 5:04 AM, Markus Kittenberger <
(spam-protected)> wrote:

>
>
> On Fri, Feb 17, 2012 at 7:55 AM, Teco Boot <(spam-protected)> wrote:
>
>> PLEASE DON"T SHOUT ...
>>
>> So you have all functions you want, but want to know why?
>> If you use SmartGW, the default is not in the main table.
>>
> same apllies if u use RtTable or RtTableDefault.
>
>> Check with ip route show table all
>>
>> Teco
>>
>> Op 17 feb. 2012, om 02:38 heeft Érico Porto het volgende geschreven:
>>
>> I'm simply uncommenting the line after "# hna4 - internet gateway:" and
>> changing from #0.0.0.0 0.0.0.0 to 0.0.0.0 0.0.0.0. Do I have to do anything
>> beside this on any of the nodes to enable one of them as internet gateway?
>>
>> Érico V. Porto
>>
>>
>> On Thu, Feb 16, 2012 at 5:43 PM, Érico Porto <(spam-protected)>wrote:
>>
>>> Hello
>>>
>>> I'm using olsrd 0.6.2, and I'm having a strange bug here. I have two
>>> nodes, one is connected to the internet, through cable, and the other
>>> isn't. These two nodes wireless interfaces are connected, and one of them
>>> is configured as internet gateway. If I type route -n in the internet
>>> gateway node, I can see my default gateway is my ethernet interface.
>>>
>>> Ok, no I'm at the other node. I type route -n and I have no default
>>> gateway set. I type telnet localhost 2006, and get all the information I
>>> expect, including the first node listed as default in the hna section. Why
>>> I see no default gateway set when typing route -n?
>>>
>>> The real problem is because I AM ABLE TO ACCESS THE INTERNET FROM THIS
>>> NODE. I have no dns, but it's ok, I don't want it, but any ip I type in
>>> browser on a computer connected to this node get's me to the right webpage!
>>>
>>> Regards
>>>
>>> Érico V. Porto
>>>
>>
>> --
>> Olsr-users mailing list
>> (spam-protected)
>> https://lists.olsr.org/mailman/listinfo/olsr-users
>>
>>
>>
>> --
>> Olsr-users mailing list
>> (spam-protected)
>> https://lists.olsr.org/mailman/listinfo/olsr-users
>>
>
>
Uhm, thanks, found my default gateway using ip route show table all. @Teco
You've said that showing in the other routing table is not default, but is
there an option so I can see it there also? (using route -n)

But yeah, the whole question was about how that was possible really.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20120217/bbae8208/attachment.html>