[Olsr-users] help me getting correct route table

[Henning Rogge]

On 02/01/2012 11:13 AM, donekal vineela wrote:
> hi,
>
> I just instald olsrd
>
> version 0.6.2
>
> and i kept my three laptops in adhoc mode and run the olsrd file up to this
> no prb yar
>
> nw i kept this three laptops in multi hop cofigaration like this
>
> lets take 3 laptop 192.168.1.1 to 3 as ip address
>
> 1->2->3
> here 1 and 2 in one range and 2 and 3 r in one range
> now to display route table.. its showing like this from 3 this is wrong
>
> Destination     Gateway         Genmask         Flags Metric Ref    Use
> Iface
> 192.168.1.1     192.168.1.1     255.255.255.255 UGH   2      0        0
> wlan0
> 192.168.1.2     192.168.1.2     255.255.255.255 UGH   2      0        0
> wlan0

I would guess that there is a direct connection between 1 and 3, what 
you see here are two direct routes.

Can you show us the output of the txtinfo plugin for the "/all" command? 
This would give us a lot of information about the state and parameters 
or the routing daemon.

Another test could be to switch of OLSRd and try to ping between node 1 
and 3. I would be interested in seeing the loss rates.

Henning Rogge


-- 
Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
Kommunikation, Informationsverarbeitung und Ergonomie FKIE
Kommunikationssysteme (KOM)
Neuenahrer Straße 20, 53343 Wachtberg, Germany
Telefon +49 228 9435-961,   Fax +49 228 9435 685
mailto:(spam-protected) http://www.fkie.fraunhofer.de
GPG: E1C6 0914 490B 3909 D944 F80D 4487 C67C 55EC CFE0