[Olsr-users] OLSR daemon starting and running issues. Causing an error.
John Schultz
(spam-protected)
Mon Dec 17 01:10:20 CET 2012
Its now working...
THANK YOU VERY MUCH
Sincerely,
John
-----Original Message-----
From: Henning Rogge [mailto:(spam-protected)]
Sent: Sunday, December 16, 2012 4:28 PM
To: John Schultz
Cc: olsr users mailing list
Subject: Re: [Olsr-users] OLSR daemon starting and running issues. Causing
an error.
If the nodes can ping each other, you can re-enable OLSR.
Start with the "minimal configuration file", you will not need most of the
parameters.
Henning Rogge
On Mon, Dec 17, 2012 at 12:23 AM, John Schultz <(spam-protected)>
wrote:
> Ok,.... all nodes are pinging each other (finally - forgot about the
> same subnet - I feel like such a noob). Do I re-enable olsr at this point?
>
> -----Original Message-----
> From: Henning Rogge [mailto:(spam-protected)]
> Sent: Sunday, December 16, 2012 4:05 PM
> To: John Schultz
> Cc: olsr users mailing list
> Subject: Re: [Olsr-users] OLSR daemon starting and running issues.
> Causing an error.
>
> Forget OLSR for a moment... deactivate it on all nodes.
>
> If you configure the wifi-interfaces on both sides of a link to the
> same subnet, you should be able to ping the other side. If not, the
> link is not working.
>
> Henning Rogge
>
> On Sun, Dec 16, 2012 at 11:53 PM, John Schultz
> <(spam-protected)>
> wrote:
>> Crap man... I have not relocated the node yet (need a wrench that I
>> do not have). I've enabled bole wlan cards and placed them in the
>> conf file, Im still not showing a link nor can I ping. An ifconfig
>> shows the correct cell id and essid, but that's just about it.
>>
>> -----Original Message-----
>> From: Henning Rogge [mailto:(spam-protected)]
>> Sent: Sunday, December 16, 2012 2:54 PM
>> To: John Schultz
>> Cc: olsr users mailing list
>> Subject: Re: [Olsr-users] OLSR daemon starting and running issues.
>> Causing an error.
>>
>> I don't know, but WEP is not really a security measurement today.
>>
>> Henning Rogge
>>
>> On Sun, Dec 16, 2012 at 10:50 PM, John Schultz
>> <(spam-protected)>
>> wrote:
>>> Im going to try and move node0 further away and see if that resolves
>>> the situation.
>>>
>>> BTW, is it possible to use 256bit wep on an ad-hoc network or even
>>> wpa_supplicant?
>>>
>>> -----Original Message-----
>>> From: Henning Rogge [mailto:(spam-protected)]
>>> Sent: Sunday, December 16, 2012 2:33 PM
>>> To: John Schultz
>>> Cc: olsr users mailing list
>>> Subject: Re: [Olsr-users] OLSR daemon starting and running issues.
>>> Causing an error.
>>>
>>> Olsr can only work if your nodes form a continuous mesh. That means
>>> there must be a path of nodes to the destination who each can ping
>>> the next/previous node along the path.
>>>
>>> If some parts of your network (in this case Node 0) cannot ping any
>>> node of the rest of the network, Olsr cannot help you.
>>>
>>> I suggest you check your link-layer (hop-by-hop) connectivity.
>>>
>>> Henning
>>>
>>> On Sun, Dec 16, 2012 at 10:28 PM, John Schultz
>>> <(spam-protected)>
>>> wrote:
>>>> I cannot ping any of the devices wirelessly from node0. I have also
>>>> tried changing the configuration to use wlan0, in case the antenna
>>>> was disconnected.
>>>>
>>>> -----Original Message-----
>>>> From: Henning Rogge [mailto:(spam-protected)]
>>>> Sent: Sunday, December 16, 2012 2:19 PM
>>>> To: John Schultz
>>>> Cc: olsr users mailing list
>>>> Subject: Re: [Olsr-users] OLSR daemon starting and running issues.
>>>> Causing an error.
>>>>
>>>> All three nodes are running with the simplified config file?
>>>>
>>>> Can Node 0 ping Node 1 OR Node 2 (that should work without Olsrd).
>>>>
>>>> Henning
>>>>
>>>> On Sun, Dec 16, 2012 at 10:14 PM, John Schultz
>>>> <(spam-protected)>
>>>> wrote:
>>>>> OK, nodes 1 and 2 are linked, noode 0 (the gw) does not see them
>>>>> or do they see it.
>>>>>
>>>>> -----Original Message-----
>>>>> From: Henning Rogge [mailto:(spam-protected)]
>>>>> Sent: Sunday, December 16, 2012 2:03 PM
>>>>> To: John Schultz
>>>>> Cc: olsr users mailing list
>>>>> Subject: Re: [Olsr-users] OLSR daemon starting and running issues.
>>>>> Causing an error.
>>>>>
>>>>> Please do me a favor...
>>>>>
>>>>> remove your whole olsrd.conf and start with the
>>>>> "olsrd.conf.minimal_freifunk" configuration. Just use "wlan1"
>>>>> instead of "wlan0".
>>>>>
>>>>> Henning Rogge
>>>>>
>>>>> On Sun, Dec 16, 2012 at 10:01 PM, John Schultz
>>>>> <(spam-protected)>
>>>>> wrote:
>>>>>> Disregard.... Found it in olsrd.conf for the interface settings.
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Henning Rogge [mailto:(spam-protected)]
>>>>>> Sent: Sunday, December 16, 2012 1:56 PM
>>>>>> To: John Schultz
>>>>>> Cc: olsr users mailing list
>>>>>> Subject: Re: [Olsr-users] OLSR daemon starting and running issues.
>>>>>> Causing an error.
>>>>>>
>>>>>> What is this ????
>>>>>>
>>>>>>> Ip4Broadcast 255.0.0.0
>>>>>>
>>>>>> Henning Rogge
>>>>>>
>>>>>> On Sun, Dec 16, 2012 at 9:51 PM, John Schultz
>>>>>> <(spam-protected)>
>>>>>> wrote:
>>>>>>> Also the tcpdump for wlan1 returns the following:
>>>>>>>
>>>>>>> tcpdump: verbose output suppressed, use -v or -vv for full
>>>>>>> protocol decode listening on wlan1, link-type EN10MB (Ethernet),
>>>>>>> capture size
>>>>>>> 65535 bytes
>>>>>>> 13:49:34.879550 ARP, Request who-has 255.255.0.0 tell 10.3.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:35.881533 ARP, Request who-has 255.255.0.0 tell 10.3.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:36.553726 ARP, Request who-has 255.255.0.0 tell 10.2.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:36.596202 ARP, Request who-has 255.255.0.0 tell 10.1.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:36.883538 ARP, Request who-has 255.255.0.0 tell 10.3.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:37.555722 ARP, Request who-has 255.255.0.0 tell 10.2.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:37.598203 ARP, Request who-has 255.255.0.0 tell 10.1.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:38.557749 ARP, Request who-has 255.255.0.0 tell 10.2.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:38.600200 ARP, Request who-has 255.255.0.0 tell 10.1.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:40.187554 ARP, Request who-has 255.255.0.0 tell 10.3.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:41.189545 ARP, Request who-has 255.255.0.0 tell 10.3.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:41.862737 ARP, Request who-has 255.255.0.0 tell 10.2.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:42.191550 ARP, Request who-has 255.255.0.0 tell 10.3.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:42.865748 ARP, Request who-has 255.255.0.0 tell 10.2.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:43.867729 ARP, Request who-has 255.255.0.0 tell 10.2.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:44.209200 ARP, Request who-has 255.255.0.0 tell 10.1.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:45.210194 ARP, Request who-has 255.255.0.0 tell 10.1.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:46.212194 ARP, Request who-has 255.255.0.0 tell 10.1.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:48.100575 ARP, Request who-has 255.255.0.0 tell 10.3.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:49.101565 ARP, Request who-has 255.255.0.0 tell 10.3.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:49.418202 ARP, Request who-has 255.255.0.0 tell 10.1.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:49.673966 ARP, Request who-has 255.255.0.0 tell 10.2.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:50.103579 ARP, Request who-has 255.255.0.0 tell 10.3.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:50.420202 ARP, Request who-has 255.255.0.0 tell 10.1.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:50.675748 ARP, Request who-has 255.255.0.0 tell 10.2.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:51.422199 ARP, Request who-has 255.255.0.0 tell 10.1.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:51.677748 ARP, Request who-has 255.255.0.0 tell 10.2.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:53.407582 ARP, Request who-has 255.255.0.0 tell 10.3.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:54.409573 ARP, Request who-has 255.255.0.0 tell 10.3.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:54.727202 ARP, Request who-has 255.255.0.0 tell 10.1.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:55.083769 ARP, Request who-has 255.255.0.0 tell 10.2.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:55.411576 ARP, Request who-has 255.255.0.0 tell 10.3.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:55.730200 ARP, Request who-has 255.255.0.0 tell 10.1.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:56.085758 ARP, Request who-has 255.255.0.0 tell 10.2.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:56.732201 ARP, Request who-has 255.255.0.0 tell 10.1.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:49:57.087758 ARP, Request who-has 255.255.0.0 tell 10.2.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:50:00.692780 ARP, Request who-has 255.255.0.0 tell 10.2.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:50:01.520602 ARP, Request who-has 255.255.0.0 tell 10.3.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:50:01.693775 ARP, Request who-has 255.255.0.0 tell 10.2.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:50:02.522103 ARP, Request who-has 255.255.0.0 tell 10.3.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:50:02.536201 ARP, Request who-has 255.255.0.0 tell 10.1.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:50:02.695765 ARP, Request who-has 255.255.0.0 tell 10.2.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:50:03.523596 ARP, Request who-has 255.255.0.0 tell 10.3.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:50:03.538200 ARP, Request who-has 255.255.0.0 tell 10.1.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:50:04.540202 ARP, Request who-has 255.255.0.0 tell 10.1.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:50:06.729618 ARP, Request who-has 255.255.0.0 tell 10.3.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:50:07.731603 ARP, Request who-has 255.255.0.0 tell 10.3.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:50:08.402791 ARP, Request who-has 255.255.0.0 tell 10.2.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:50:08.733602 ARP, Request who-has 255.255.0.0 tell 10.3.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:50:09.405786 ARP, Request who-has 255.255.0.0 tell 10.2.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:50:10.407787 ARP, Request who-has 255.255.0.0 tell 10.2.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:50:10.951204 ARP, Request who-has 255.255.0.0 tell 10.1.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:50:11.954198 ARP, Request who-has 255.255.0.0 tell 10.1.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>> 13:50:12.238623 ARP, Request who-has 255.255.0.0 tell 10.3.0.1,
>>>>>>> length
>>>>>>> 28
>>>>>>>
>>>>>>> -----Original Message-----
>>>>>>> From: Henning Rogge [mailto:(spam-protected)]
>>>>>>> Sent: Sunday, December 16, 2012 1:42 PM
>>>>>>> To: John Schultz
>>>>>>> Cc: olsr users mailing list
>>>>>>> Subject: Re: [Olsr-users] OLSR daemon starting and running issues.
>>>>>>> Causing an error.
>>>>>>>
>>>>>>> Are you seeing OLSR packets (UDP port 698) leaving your computer
>>>>>>> (check with tcpdump)?
>>>>>>>
>>>>>>> Do you have layer-2/3 connectivity with your neighbors (check
>>>>>>> with
>>>> ping)?
>>>>>>>
>>>>>>> Henning Rogge
>>>>>>>
>>>>>>> On Sun, Dec 16, 2012 at 12:15 PM, John Schultz
>>>>>>> <(spam-protected)>
>>>>>>> wrote:
>>>>>>>> OK.... did that, olsrd appears to be running, but there are no
>>>>>>>> links
>>>>>>>>
>>>>>>>> -----Original Message-----
>>>>>>>> From: Henning Rogge [mailto:(spam-protected)]
>>>>>>>> Sent: Sunday, December 16, 2012 12:55 AM
>>>>>>>> To: John Schultz
>>>>>>>> Cc: olsr users mailing list
>>>>>>>> Subject: Re: [Olsr-users] OLSR daemon starting and running issues.
>>>>>>>> Causing an error.
>>>>>>>>
>>>>>>>> I would suggest removing this section:
>>>>>>>>
>>>>>>>> IpcConnect
>>>>>>>> {
>>>>>>>> MaxConnections 1
>>>>>>>> Host 127.0.0.1
>>>>>>>> Net 10.0.0.0 255.0.0.0
>>>>>>>> }
>>>>>>>>
>>>>>>>> You don't need it anyways unless you want to try to use the GTK
>>>>>>>> gui (which might contain quite some bugs because nobody cared
>>>>>>>> about the code for years).
>>>>>>>>
>>>>>>>> Henning Rogge
>>>>>>>>
>>>>>>>> --
>>>>>>>> Steven Hawkings about cosmic inflation: "An increase of
>>>>>>>> billions of billions of percent in a tiny fraction of a second.
>>>>>>>> Of course, that was before the present government."
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Olsr-users mailing list
>>>>>>>> (spam-protected)
>>>>>>>> https://lists.olsr.org/mailman/listinfo/olsr-users
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Steven Hawkings about cosmic inflation: "An increase of billions
>>>>>>> of billions of percent in a tiny fraction of a second. Of
>>>>>>> course, that was before the present government."
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Olsr-users mailing list
>>>>>>> (spam-protected)
>>>>>>> https://lists.olsr.org/mailman/listinfo/olsr-users
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Steven Hawkings about cosmic inflation: "An increase of billions
>>>>>> of billions of percent in a tiny fraction of a second. Of course,
>>>>>> that was before the present government."
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Steven Hawkings about cosmic inflation: "An increase of billions
>>>>> of billions of percent in a tiny fraction of a second. Of course,
>>>>> that was before the present government."
>>>>>
>>>>>
>>>>> --
>>>>> Olsr-users mailing list
>>>>> (spam-protected)
>>>>> https://lists.olsr.org/mailman/listinfo/olsr-users
>>>>
>>>>
>>>>
>>>> --
>>>> Steven Hawkings about cosmic inflation: "An increase of billions of
>>>> billions of percent in a tiny fraction of a second. Of course, that
>>>> was before the present government."
>>>>
>>>>
>>>> --
>>>> Olsr-users mailing list
>>>> (spam-protected)
>>>> https://lists.olsr.org/mailman/listinfo/olsr-users
>>>
>>>
>>>
>>> --
>>> Steven Hawkings about cosmic inflation: "An increase of billions of
>>> billions of percent in a tiny fraction of a second. Of course, that
>>> was before the present government."
>>>
>>>
>>> --
>>> Olsr-users mailing list
>>> (spam-protected)
>>> https://lists.olsr.org/mailman/listinfo/olsr-users
>>
>>
>>
>> --
>> Steven Hawkings about cosmic inflation: "An increase of billions of
>> billions of percent in a tiny fraction of a second. Of course, that
>> was before the present government."
>>
>>
>> --
>> Olsr-users mailing list
>> (spam-protected)
>> https://lists.olsr.org/mailman/listinfo/olsr-users
>
>
>
> --
> Steven Hawkings about cosmic inflation: "An increase of billions of
> billions of percent in a tiny fraction of a second. Of course, that
> was before the present government."
>
>
> --
> Olsr-users mailing list
> (spam-protected)
> https://lists.olsr.org/mailman/listinfo/olsr-users
--
Steven Hawkings about cosmic inflation: "An increase of billions of billions
of percent in a tiny fraction of a second. Of course, that was before the
present government."
More information about the Olsr-users
mailing list