[Olsr-users] OLSR daemon starting and running issues. Causing an error.

[John Schultz]

Forgot to add the output from attempting to run olsrd:

*** olsr.org -  0.6.1-git_-hash_0b616759ced652dc083d7b0cba610180  - ***

Build date: 2011-05-07 11:15:38 on newk

http://www.olsr.org

 

Parsing file: "/etc/olsrd.conf"

Debug level: 1

Link quality fish eye 1

IpVersion: 4

Clear screen enabled

Noint set to 1

Willingness: 7

        IPC host: 127.0.0.1

Hysteresis disabled

Link quality level 2

Pollrate 0.05

TC redundancy 2

MPR coverage 7

Plugin: olsrd_httpinfo.so.0.1

Plugin param key:"Port" val: "8080"

Plugin param key:"Net" val: "0.0.0.0 0.0.0.0"

Plugin: olsrd_txtinfo.so.0.1

Plugin param key:"Accept" val: "127.0.0.1"

Plugin: olsrd_dot_draw.so.0.3

Plugin param key:"accept" val: "0.0.0.0"

Plugin param key:"port" val: "2004"

setting ifs_in_curr_cfg = 0

        HELLO interval: 5.00

        HELLO validity: 300.00

        TC interval: 2.00

        TC validity: 300.00

        MID interval: 5.00

        MID validity: 300.00

        HNA interval: 5.00

        HNA validity: 300.00

        IPv4 broadcast/multicast : AUTO

        Mode           : mesh

        IPv6 multicast           : ::

        HELLO emission/validity  : 5.00 (d)/300.00 (d)

        TC emission/validity     : 2.00 (d)/300.00 (d)

        MID emission/validity    : 5.00 (d)/300.00 (d)

        HNA emission/validity    : 5.00 (d)/300.00 (d)

        Autodetect changes       : no

Added 0.0.0.0 to IP deny set

Added 127.0.0.1 to IP deny set

 

---- Interface configuration ----

 

Checking wlan1:

        Wireless interface detected

        Metric: 1

        MTU - IPhdr: 1472

        Index 4

        Address:10.1.0.1

        Netmask:255.255.0.0

        Broadcast address:10.1.255.255

New main address: 10.1.0.1

IPC bind: Address already in use

Will retry in 10 seconds...

IPC bind: Address already in use

OLSR EXIT: IPC bind

Terminated

 

 

From: John Schultz [mailto:(spam-protected)] 
Sent: Saturday, December 15, 2012 7:50 PM
To: 'olsr users mailing list'
Subject: OLSR daemon starting and running issues. Causing an error.
Importance: High

 

Using Voyage linux 0.7.5 (Debian Squeeze), OLSRD build date 2011-05-07 I am
getting "IPC bind: Address already in use" when running the olsrd command.
In fact I am getting it twice and then a terminated message. When I check ps
ax, I do not see olsrd running at all.

My olsrd.conf file is as follows:

DebugLevel 0

IpVersion 4

AllowNoInt yes

TosValue 16

Willingness 7

OlsrPort 698!

RtTableDefault 0

RtTable 254

UseHysteresis no

HystScaling 0.50

HystThrHigh 0.80

HystThrLow 0.30

Pollrate 0.1

NicChgsPollInt 2.5

TcRedundancy 2

MprCoverage 7

LinkQualityLevel 2

LinkQualityFishEye 1

ClearScreen yes

#LinkQualityDijkstraLimit 0 7.0

#LinkQualityWinSize 100

 

IpcConnect

{

    MaxConnections 1

    Host 127.0.0.1

    Net 10.0.0.0 255.0.0.0

}

 

Hna4

{

    #0.0.0.0 0.0.0.0

    #192.168.1.0 255.255.255.0

}

 

Hna6

{

    #:: 0

    #fec0:2200:106:: 48

}

LoadPlugin "olsrd_httpinfo.so.0.1"

{

    PlParam "Port" "8080"

#    PlParam "Host" "80.23.53.22"

#    PlParam "Net" "10.0.0.0 255.0.0.0"

    PlParam "Net" "0.0.0.0 0.0.0.0"

}

LoadPlugin "olsrd_txtinfo.so.0.1"

{

    PlParam "Accept" "127.0.0.1"

}

LoadPlugin "olsrd_dot_draw.so.0.3"

{

    PlParam "accept" "0.0.0.0"

    PlParam "port" "2004"

}

Interface "wlan1"

{

    AutoDetectChanges yes

    Ip4Broadcast 255.0.0.0

    Mode "mesh"

    HelloInterval 5.0

    HelloValidityTime 90.0

    TcInterval 3.0

    TcValidityTime 300.0

    MidInterval 15.0

    MidValidityTime 270.0

    HnaInterval 15.0

    HnaValidityTime 90.0

    #LinkQualityMult 192.168.0.1 0.5

    #LinkQualityMult default 0.8

}

 

 

My interfaces file is as follows:

auto lo
iface lo inet loopback
 
allow-hotplug eth0
iface eth0 inet dhcp
 
#Client Radio
#auto wlan0
#iface wlan0 inet static
#       address 10.0.1.1
#       netmask 255.255.255.0
#       network 10.0.1.0
#       broadcast 10.0.1.255
#       gateway 10.0.1.1
 
#Backhual Radio
auto wlan1
iface wlan1 inet static
        address 10.1.0.1
        netmask 255.255.0.0
        network 10.1.0.0
        broadcast 10.1.255.255
        gateway 10.1.0.1
        wireless-channel 165
        wireless-essid MESH
        wireless-mode ad-hoc

 

Any assistance you can provide me will be most appreciative.

Thanks,
John

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20121215/4d8815b3/attachment.html>