[Olsr-users] IPv6 failure

[Glenn Daneels]

Hi Saverio,

I tried your suggestion, but this did not work: the output stayed the same
(I included it [1])

Thanks,

Glenn

[1] http://pastebin.com/k2DHiCXa

On Fri, Dec 7, 2012 at 5:31 PM, Saverio Proto <(spam-protected)> wrote:

> I think the problem is that you specifying the inteface eth5 both in
> the command line and in the configuration file. Try to remove eth5
> from command line.
>
> Saverio
>
>
> 2012/12/7 Glenn Daneels <(spam-protected)>:
> > Hi,
> >
> > Sorry for the late answer (but I had to make some changes to my nodes),
> here
> > is my olsrd.conf [1].
> > In the meanwhile, I made sure that my nodes have site local address (an
> > ifconfig output of one of the nodes is included [2], I use the eth5
> > interface). I also included a new output file[3].
> > I call the olsrd daemon in the following manner: olsrd -i eth5 -ipv6 (I
> know
> > that these options are already included in the olsrd.conf, but I guess
> > repeating this on the command line does not matter.)
> >
> > Thanks in advance,
> >
> > Glenn
> >
> > [1] olsrd.conf: http://pastebin.com/KNjS5igK
> > [2] ifconfig: http://pastebin.com/1ZtE5kE9
> > [3] output: http://pastebin.com/CRBvknyQ
> >
> >
> > On Thu, Dec 6, 2012 at 9:16 AM, Saverio Proto <(spam-protected)>
> wrote:
> >>
> >> Please post your olsrd.conf file otherwise we cannot give help.
> >>
> >> Make sure eth5 has a valide global IPv6 address. Also site local
> >> address should be fine. Link local address is not enough
> >>
> >> Saverio
> >>
> >>
> >> 2012/12/5 Glenn Daneels <(spam-protected)>:
> >> > Hi,
> >> >
> >> > I'm trying to use OLSRd in IPv6 mode, but this is not working for me.
> >> > I tried to enable OLSRd via the /etc/olsrd.conf file and getting the
> >> > output
> >> > in [1].
> >> >
> >> > Especially this part concerns me:
> >> >
> >> > Warning, niit4to6 device is not available, deactivating NIIT
> >> > Added :: to IP deny set
> >> > Added ::1 to IP deny set
> >> >
> >> >  ---- Interface configuration ----
> >> >
> >> > Checking eth5:
> >> >         Not a wireless interface
> >> > No interfaces detected! This might be intentional, but it also might
> >> > mean
> >> > that your configuration is fubar
> >> >
> >> >
> >> > Does niit4to6 need to be available for the ipv6 mode to work?
> >> > And why does it say that is does not detects interfaces? eth5 is the
> >> > interface it should detect, which it clearly does, but is it trying to
> >> > only
> >> > finding wireless ifaces? And why would he do this?
> >> >
> >> > And although there are two OLSRd nodes which are connected to each
> >> > other,
> >> > OLSRd does not seem to find the other node; it keeps polling, but does
> >> > not
> >> > find anything:
> >> >
> >> >  Scheduler started - polling every 0.050000 ms
> >> >
> >> > Does anyone have any ideas?
> >> >
> >> > Thanks in advance,
> >> > Glenn
> >> >
> >> > [1] http://pastebin.com/6GTjvVYs
> >> >
> >> > --
> >> > Olsr-users mailing list
> >> > (spam-protected)
> >> > https://lists.olsr.org/mailman/listinfo/olsr-users
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20121207/a07fc2bc/attachment.html>