[Olsr-users] OLSRD+bmf Plugin

[Teco Boot]

Op 17 apr. 2012, om 13:19 heeft PRASHANT RANJAN het volgende geschreven:

> Hello
> I am using OLSRD v0.6 with bmf v1.7 plugin.
> 
> Ouput of olsrd on 10.0.0.1
> http://i.imgur.com/9OoBs.jpg 
> 
> Ouput of olsrd during startup on 10.0.0.4(bmf installed)
> http://i.imgur.com/tnmW9.jpg 
> 
> 
> root @voyage ~ # ping 224.0.0.1
> PING 224.0.0.1 (224.0.0.1): 56 data bytes
> --- 224.0.0.1 ping statistics ---
> 45 packets transmitted, 0 packets received, 100% packet loss
> 
> I saw this in mailing-lists(https://lists.olsr.org/pipermail/olsr-dev/2011-March/004406.html)
> echo "0" > /proc/sys/net/ipv4/icmp_echo_ignore_broadcasts
> 
> Then, my ping on 10.0.0.3 is: 
> 
> 64 bytes from 10.0.0.3: icmp_req=1 ttl=64 time=0.066 ms
> 64 bytes from 10.0.0.3: icmp_req=2 ttl=64 time=0.079 ms
> 64 bytes from 10.0.0.3: icmp_req=3 ttl=64 time=0.078 ms
> 64 bytes from 10.0.0.3: icmp_req=4 ttl=64 time=0.080 ms
> 64 bytes from 10.0.0.3: icmp_req=5 ttl=64 time=0.111 ms
> 64 bytes from 10.0.0.3: icmp_req=6 ttl=64 time=0.111 ms
> 
> I have other nodes running same config and connected by ad-hoc network with ip 10.0.0.4 and 10.0.0.1.
> Why it is only pinging it's own address only?

I assume unicast ping works.
I recommend start testing with non-link-local multicast (not 224.0.0.0/24 addresses).

I can't check your config (bmf & actual interfaces etc.) So you ask me to guess.

Teco

> 
> Thanks
> Prashant Ranjan
>  
> 
> -- 
> Olsr-users mailing list
> (spam-protected)
> https://lists.olsr.org/mailman/listinfo/olsr-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20120417/fb05f7c8/attachment.html>