[Olsr-users] Testing OLSRD hops feature

Markus Kittenberger (spam-protected)
Fri May 13 23:55:23 CEST 2011


olsrd can do this, it can do it not only for 2 or 3 hops but for hundreds of
hops aswell *GG

and there is no option do enable (or disable) this,.. as creating routes to
destinations further way than one hop this is the sole purpose of a routing
protocol,...

but there are various OS specific methods to break routing/forwarding, or
anything *G

my general advice (for such a simpe 2 hop setup), ist try to setup manual
routes first, to learn and understand how routing works, and how to debug
it, and what u have to configure in you OS to make it work,.

and afterwards start olsrd,..

Markus

p.s. you should also state that u (as i asume) used macbooks, and this is
very likely the reason for your problems,..

On Wed, May 11, 2011 at 5:41 AM, Zack Genesis <(spam-protected)>wrote:

> Hi
> I'm having a doubt about the hopping feature of OLSRD
> I have tested with 3 laptops
>
> Laptop1 -- Laptop2 -- Laptop3
>
> I distance Laptop 1 & 3 apart so they cant commnicate
> But by placing laptop 2 in the middle by theory, shouldn't laptop1 be able
> to pass msg to laptop3 through laptop2 by doing hop?
> It seem to me that laptop1 can communicate to laptop2 but not 3...
>
> Is there any solution to set the "hop" feature on OLSRD?
> Appreciated for any solutions or ideas, Thank
>
> --
> Olsr-users mailing list
> (spam-protected)
> http://lists.olsr.org/mailman/listinfo/olsr-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20110513/a0a026df/attachment.html>


More information about the Olsr-users mailing list