[Olsr-users] Help in mesh configuration
Wed Aug 17 17:17:06 CEST 2011
thats why i already wrote to John in my last mail: u might need nat (on devB
for traffic leaving towards the gateway) (-;
or static routes from the gateway back to all ipranges used in the mesh
(but honestly what he really needs is a "network adminstrator")
On Wed, Aug 17, 2011 at 2:52 PM, Michel Blais <(spam-protected)>wrote:
> We have exchange some mail outside of olsr-user mailling list since
> everything was looking fine for olsr and I think that it a static route
> problem. Is gateway is 192.168.1.1/24 and is olsr mesh in the
> 192.168.3.0/24 subnet. He can ping the IP address of Dev B in the
> 192.168.1.0/24 subnet but not is gateway. I think is gateway just don't
> have any route for subnet 192.168.3.0/24 pointing at Dev B 192.168.1.168
> IP address.
> Le 2011-08-17 03:23, Markus Kittenberger a écrit :
> On Wed, Aug 17, 2011 at 12:28 AM, John Tobias <(spam-protected)>wrote:
>> Hi Guys,
>> I ping google.com using its IP address (188.8.131.52). Unfortunately, I
>> am still no luck.
>> # ping 184.108.40.206 returning "ping: sendto: Network is unreachable"
> Network unreachable is strange,..
> hmm txtinfo reported a defaultroute already some mails ago:
> > Table: Routes
> > Destination Gateway IP Metric ETX Interface
> > 0.0.0.0/0 192.168.3.4 1 1.066 wlan0
> if this is still true, network unreachable should not happen, worst case
> would be no ping replies, as u likely need NAT on devB.
> check with ip route, which default routes (0.0.0.0/0) u actually have on
>> Here's the tcpdump:
> which shows nothing but oslrd messages *G
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Olsr-users