[Olsr-users] Help in mesh configuration

[Markus Kittenberger]

hmm afaics you did not announce the outside world with an hna on dev B
(so dev a will not know about its existence,.)

(while contrary you announced 192.168.13.0/24 which you seem to have on both
devices, so i am not sure if u really need this hna)

Markus

On Tue, Aug 16, 2011 at 4:23 AM, John Tobias <(spam-protected)>wrote:

> Hi Guys,
>
> I was trying to configure my two devices to enable the mesh network
> support. I will call them DevA and DevB, the two devices seems they can see
> to each other (I can ping them vice-versa). DevB has a capability to go
> outside world (WAN), but DevA need to use the mesh network in order to go
> outside world. When, I issue a command 'ping google.com' on DevA, it
> doesn't work. Any idea what am I missing (Please see DevA and DevB
> configuration below)?
>
> NOTE: I do not have a router that support mesh networking and I am not sure
> if I needed it.
>
> DevA:
> wlan0     Link encap:Ethernet  HWaddr 00:0E:8E:30:BC:07
>           inet addr:192.168.13.3  Bcast:192.168.13.255  Mask:255.255.255.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:28579 errors:105 dropped:0 overruns:0 frame:0
>           TX packets:3344 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:3761333 (3.5 Mb)  TX bytes:361494 (353.0 Kb)
>
> Table: Links
> Local IP        Remote IP       Hyst.   LQ      NLQ     Cost
> 192.168.13.3    192.168.13.4    0.00    1.000   0.862   1.158
>
> Table: Neighbors
> IP address      SYM     MPR     MPRS    Will.   2 Hop Neighbors
> 192.168.13.4    YES     NO      NO      3       0
>
> Table: Topology
> Dest. IP        Last hop IP     LQ      NLQ     Cost
> 192.168.13.4    192.168.13.3    1.000   0.862   1.158
> 192.168.13.3    192.168.13.4    0.862   1.000   1.158
>
> Table: HNA
> Destination     Gateway
> 192.168.13.0/24 192.168.13.3
>
> Table: MID
> IP address      Aliases
>
> Table: Routes
> Destination     Gateway IP      Metric  ETX     Interface
> 192.168.13.4/32 192.168.13.4    1       1.158   wlan0
>
>
> *DevB:*
> eth0      Link encap:Ethernet  HWaddr 00:25:19:BF:AF:F4
>           inet addr:192.168.1.168  Bcast:192.168.1.255  Mask:255.255.255.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1492  Metric:1
>           RX packets:9247 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:3892 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:651031 (635.7 Kb)  TX bytes:1595657 (1.5 Mb)
>
> wlan0     Link encap:Ethernet  HWaddr 00:0E:8E:30:BB:A2
>           inet addr:192.168.13.4  Bcast:192.168.13.255  Mask:255.255.255.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:194197 errors:480 dropped:0 overruns:0 frame:0
>           TX packets:15546 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:25706893 (24.5 Mb)  TX bytes:1726766 (1.6 Mb)
>
> Table: Links
> Local IP        Remote IP       Hyst.   LQ      NLQ     Cost
> 192.168.13.4    192.168.13.3    0.00    0.862   1.000   1.158
>
> Table: Neighbors
> IP address      SYM     MPR     MPRS    Will.   2 Hop Neighbors
> 192.168.13.3    YES     NO      NO      5       0
>
> Table: Topology
> Dest. IP        Last hop IP     LQ      NLQ     Cost
> 192.168.13.4    192.168.13.3    1.000   0.862   1.158
> 192.168.13.3    192.168.13.4    0.862   1.000   1.158
>
> Table: HNA
> Destination     Gateway
> 192.168.13.0/24 192.168.13.4
>
> Table: MID
> IP address      Aliases
>
> Table: Routes
> Destination     Gateway IP      Metric  ETX     Interface
> 192.168.13.3/32 192.168.13.3    1       1.158   wlan0
>
>
> Thanks,
>
> john
>
> --
> Olsr-users mailing list
> (spam-protected)
> https://lists.olsr.org/mailman/listinfo/olsr-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20110816/a1341855/attachment.html>