[Olsr-users] High CPU utilization

Adam Wozniak (spam-protected)
Thu Jan 28 00:47:06 CET 2010


FYI, I do NOT see this problem with olsrd 0.5.5 (olsrd-a5b9cf969979)

--Adam

Markus Kittenberger wrote:
> Am 27.01.2010, 23:27 Uhr, schrieb Adam Wozniak <(spam-protected)>:
>
>> Markus Kittenberger wrote:
>>> one quesrtion: does your arm router have any other running 
>>> olsr-neighbours before you start the olsrd on x86?
>> No.  These are the only two devices on the ad-hoc essid.
> hmmm
>
> so why does it report so many different neighbours,..
>
> this looks as if the x86 oslrd produces random packets/topology 
> information,..
> which OS do you use there?
>
> which of course stresses the cpu of the arm router, as it tries to 
> understand this nonsense *G
>
> hmmm can u test with 2 similiar x86 systems, and 2 arm systems aswell?
>
>>>> IP addr (2-hop)  IP addr (1-hop)  Total cost
>>>> 76.107.4.0       172.20.0.2       INFINITE
>>>> (and so on, for all kinds of random IP addresses...)
>>> does this stay infinite?
>> Yes, this continues indefinitely, until I kill olsrd on the x86, 
>> after which the ARM eventually calms down.
>
>>
>>>> DebugLevel        2
>>> to say it again: use 0 here! *G
>> I just tried.  This kills the symptom but not the disease; No more 
>> console output, but the CPU on the ARM quickly runs up to 99% use by 
>> olsrd.
> ok so we have another problem,... see above,..
>>
>
>





More information about the Olsr-users mailing list