[Olsr-users] G1 / Linksys WRT demo
Alex Morlang
(spam-protected)
Sat Jan 16 21:03:31 CET 2010
Am 16.01.2010 um 20:54 schrieb marc fawzi:
> I'm limited to the WRT54-GL because I thought that's the only model
> that OLSR has been ported to .... ?
>
http://firmware.leipzig.freifunk.net/kamikaze/
this is a ready made firmware with all needed prebuilt support.
if you are skilled, use plain OpenWrt which supports more then 10
embedded platforms, resulting in several hundred different models of
router.
> In any case it seems that the better of the two products I listed is
> this one:
>
> http://www.danets.com/turbotenna/turbotenna%20009xt.php
>
> which offers +12dB reception gain
>
no need to do that.
Alex
>
>
> On Sat, Jan 16, 2010 at 11:50 AM, Henning Rogge
> <(spam-protected)> wrote:
> Am Samstag 16 Januar 2010 20:43:00 schrieb marc fawzi:
> > One more (the rest you guys can Google):
> >
> > "The WZ-2301A is an indoor solution 1W bi-directional Booster
> designed for
> > 2.4GHz wireless LANs. This unit comes with an easy plug-and-play
> > installation, which works together with an indoor Wireless Access
> Point to
> > improve its operation range and performance. The unit is ideal for
> use with
> > 2.4 GHz frequency hopping or direct sequence spread spectrum radio
> modems
> > and 802.11b/g devices. The amplifiers increase range by providing
> transmit
> > gain as well as low-noise receive gain. This receive gain
> increases the
> > receive sensitivity of wireless LAN Access Point. Full output
> power of 1W
> > is achieved with only 5 mW input into the Booster."
> You can buy 2.4 GHz WLAN equipment directly with 1W power... no need
> for a
> special booster.
>
> Henning
>
> --
> Olsr-users mailing list
> (spam-protected)
> http://lists.olsr.org/mailman/listinfo/olsr-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20100116/7ed0fefc/attachment.html>
More information about the Olsr-users
mailing list