[Olsr-users] Sometimes, my route is not announecd
Thu Aug 12 15:14:41 CEST 2010
I have to restart the nexthop OLSR-Daemon v0.5.6-r7. I think that
v0.6.0 don't have this problem. I think i should update all my 20 nodes
to v0.6.0 ;-) It's a lot of work... After i restart the v0.5.6-r7, all
HNA-Entrys are propagated correctly.
My topology looks like this:
(vlan1) A --> B --> D --> E
(vlan2) A --> C --> D --> E
C, D, E runs olsrd v0.5.6-r7
A, B runs olsrd v0.6.0
After stopping the OLSR-Daemon (A) and start it again, the
route-information is not available on (D, E) when (C) was selected as
gateway by OLSRD. (B and C) are knowing about the exported routes from (A).
Currently, i have a route-flapping. OLSR can not decide if to use (C)
oder (B) as gateway. When (A) selects (C) the node is disconnected.
After 5 Minutes (A) reselects (B) and so on... I had a 36% downtime.
I've only upgraded on new hosts to v0.6.0. Therefor i used v0.5.6-r7 on
all hosts, but had 1 of 30 days to restart some v0.5.6-r7-Hops to get
the OLSR working correctly. Don't know why.
Liebe Grüße aus Freilassing,
RSM Freilassing Tel.: +49 8654 607110
Nocksteinstr. 13 Fax.: +49 8654 670438
D-83395 Freilassing www.rsm-freilassing.de
Am 12.08.2010 13:58, schrieb Markus Kittenberger:
> On Thu, Aug 12, 2010 at 1:37 PM, Michael Rack
> <mailto:(spam-protected)>> wrote:
> Dear List,
> i've installed olsrd v0.6.0 (Build date: 2010-06-23 02:44:21).
> Sometimes my HNA-Entrys get not delivered to each end. The most
> of the time, only the next hop have the HNA-Entry in its routing-table
> hmm you mean most of the time within "sometimes" times, the hna is
> only propagated one hop,..
> and what is outside of "most of the time"?
> hmm did u try to use only 0.6.0 or only r7 versions?
> p.s. i have maybe the same bug here, where an old r7 node is having
> problems,.. (sometimes the network "forgets" its mid)
> maybe i will try to reproduce (before updating to 0.6.0), but if this
> bug is only in r7 i will not hunt it,.. *G
> There are running olsrd v0.6.0 (as HNA-Announce) and v0.5.6-r7 (as
> next hop).
> Also my WEIGHT Settings per Interface will not affect on the
> v0.6.0. I have two links. One got Weight 10 (vlan1), the other
> Weight 1 (vlan2), but allways (vlan1) will be used.
> What is going wrong here?
> Liebe Grüße aus Freilassing,
> Michael Rack
> RSM Freilassing
> RSM Freilassing Tel.: +49 8654 607110
> Nocksteinstr. 13 Fax.: +49 8654 670438
> D-83395 Freilassing www.rsm-freilassing.de
> Olsr-users mailing list
> (spam-protected) <mailto:(spam-protected)>
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Olsr-users