[Olsr-users] ns2 and olsrd

[Henning Rogge]

On Montag 04 Mai 2009 18:53:17 you wrote:
> We are using olsrd 0.5.4. We have downloaded it from the repository.  The
Maybe you should upgrade to 0.5.6-r4 (the most current stable release).
> real problem is that at first olsrd makes this table:
>
> Destination     Gateway         Genmask         Flags Metric Ref    Use
> Iface
> 10.0.0.4        10.0.0.3        255.255.255.255 UGH   2      0        0
> eth0 10.0.0.3        *               255.255.255.255 UH    1      0       
> 0 eth0 10.0.0.0        *               255.0.0.0       U     0      0      
>  0 eth0
>
>
> and when it pass only a few seconds the table is:
>
> Destination     Gateway         Genmask         Flags Metric Ref    Use
> Iface
> 10.0.0.4        *               255.255.255.255 UH    1      0        0
> eth0 10.0.0.3        *               255.255.255.255 UH    1      0       
> 0 eth0 10.0.0.0        *               255.0.0.0       U     0      0      
>  0 eth0
>
Can you install the txtinfo and post the output of it here ?

> The first table its okay but the other is wrong. We thought that olsrd will
> work fine under ns2.
If you use the NS-2 emulation mode just as a layer 1/2 emulation, OLSR should 
not care.


(and please reply to the mailinglist too ;) )

Henning

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 197 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20090504/967745c3/attachment.sig>